Dorset · England
Bath chip & crack repair in Corscombe, Dorset
Bath repair in and around Corscombe: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips under the taps
How we price bath repair
Repairs from £95. There is no area surcharge for Corscombe. What changes the price is:
- The colour and finish to match
- Whether we combine several jobs
- The material and finish
- How much damage there is
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- One picture of the entire bath
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Bath repair in Corscombe, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We’re often asked to fix hairline or through cracks in acrylic and chips under the taps, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Corscombe (DT2)
- Region
- Dorset
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why Corscombe customers choose us
- Normally one visit, start to finish
- No need to remove anything
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
Read our full price list or resurfacing vs replacement cost guide.
Landlord and trade work in Corscombe
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Corscombe as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Check that an acrylic bath doesn’t move when you stand in it
- Give the bath a quick rinse after use
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Covering Corscombe
Corscombe is about 7 miles south of Yeovil, in Dorset. From the centre of Corscombe to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Corscombe is one of 462 towns and villages in Dorset we cover.
All of DT2 is covered. That includes homes on High Street, Fudge Hill and Linhay. We also cover the places around Corscombe: West Chelborough (2 miles east), Benville (2 miles south-east), Halstock (2 miles north-east), Netherstoke (3 miles north-east) and Pendomer (3 miles north). We also work in nearby towns such as Dorchester (14 miles south-east), Bridport (8 miles south), Sherborne (10 miles north-east), Fordington (14 miles south-east), Lyme Regis (14 miles south-west) and Beaminster (3 miles south-west).
Near you in Corscombe
Around Corscombe, we work in homes near Church of St Mary and the streets around them. For rail, the closest station is Crewkerne station, about 4.4 miles north-west. Other landmarks nearby include Mohun Castle (2.9 miles west) and Beaminster Museum (3.4 miles south-west). Open spaces near Corscombe include Toller Down.
Honest limits
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Also near Corscombe
More services for Corscombe
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
FAQs for Corscombe
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Are there extra charges for Corscombe?
No. Our quotes include travel, with the same prices everywhere we work.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Will there be a smell?
Expect a mild smell while we are working, which fades afterwards.
How invisible is a bath repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. It generally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Let us know which floor the room is on
- Point us to the nearest place to park
- Open a window if you can
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
