Somerset · England
Bath Repair for Halstock homes
Damaged bath in Halstock? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- A chipped rim or side
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Bath repair in Halstock without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We’re often asked to fix a chip where the taps sit and deep scratches in acrylic, in roll-top & freestanding, whirlpool & spa baths and acrylic.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Halstock (BA22)
- County
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Halstock
Also in Halstock
FAQs for Halstock
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- CHAS and Constructionline accredited
- We’ll tell you if it’s not worth repairing
- No need to remove anything
- Colour mixed on the day to match
Read our prices page and bath cost comparison.
Halstock and nearby
Halstock is about 5 miles south of Yeovil, in Somerset. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Halstock is one of 640 places in Somerset where we work.
Every address in BA22 is covered, from the main roads to the quietest streets. You will find streets such as Bransford, St Juthware Close and Yeovil Road, all of which we cover. Other places close to Halstock include Netherstoke (1 mile north), West Chelborough (2 miles south), Pendomer (2 miles north-west), Sutton Bingham (2 miles north) and Corscombe (2 miles south-west). Further out, we also cover Yeovil (5 miles north), Chard (13 miles west), Crewkerne (6 miles west), Somerton (13 miles north), Ilminster (12 miles west) and Preston Plucknett (5 miles north).
What’s near Halstock
Typical jobs here are in homes near Church of St Juthware and St Mary, among other places. The nearest railway station is Chetnole station, about 3.6 miles east of the centre. A little further out are Dawe's Twineworks (3.8 miles north-west) and Mohun Castle (4.4 miles west). Open spaces near Halstock include Abbot's Hill.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the next day.
Before we arrive
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
Get a quote
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
What bath repair costs
Prices start from £95. There’s no area surcharge for Halstock. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- How hard the colour is to match
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- One sharp close-up of the damage
- What it’s made of, if you know
- One picture of the whole bath
- Natural light rather than flash
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
When we’d advise against a repair
In fairness, some problems need a different fix:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- A steel bath rusted through
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
What we’re called out for in Halstock
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
You may need us if you’ve spotted:
- Impact holes in acrylic
- Hairline or through cracks in acrylic
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
What to look for in a quote
- Whether the price is fixed and includes VAT
- What prep work is covered
- What protection goes down before work starts
- How long it needs to cure
About our accreditations · Every repair comes with a one-year guarantee.
