Staffordshire · England
Bath chip & crack repair in Coton, Staffordshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Coton, with a one-year guarantee on every repair.
- Repairs from £95
- Chips along the edge of the bath
- Rusty patches near the plughole
How we price bath repair
Prices start from £95. There’s no area surcharge for Coton. What changes the price is:
- The colour and finish to match
- Access to the area
- Any earlier repairs that need removing first
- How many areas need work
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Something in shot to show the size
Send us a photo of the damage and one of the whole item, and tell us you’re in Coton, and we will come back with a fixed quote.
How we handle bath repair in Coton
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, generally in a single visit. Whether it’s damage done while the bathroom was being fitted and damage beneath the taps, we can help, on acrylic, cast iron enamel and whirlpool & spa baths alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Coton (ST18)
- Area hub
- Staffordshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Coton and the surrounding area
Coton is about 5 miles east of Stone, in Staffordshire. Jobs in Coton are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in 512 places in Staffordshire, from the larger towns to small villages. Our jobs stretch from Coton to Birmingham (about 29 miles away).
Every address in ST18 is within our area, from the main roads to the quietest streets. That includes homes on Uttoxeter Road and Wallbrook Road. Other places close to Coton include Coton Hayes (1 mile north-east), Milwich (1 mile west), Fradswell (1 mile south-east), Dayhills (2 miles west) and Smallrice (2 miles west). Further out, we also cover Stafford (7 miles south-west), Newcastle-under-Lyme (13 miles north-west), Cannock (13 miles south), Longton (8 miles north-west), Rugeley (10 miles south) and Burntwood (15 miles south).
Landmarks near Coton
Locally, our jobs take us to homes close to Green Lea First School, The Green Man pub and Church of All Saints. A little further out are Chartley Castle (2.9 miles south-east).
FAQs for Coton
How long before I can use the bath?
Typically the following day. We will tell you the exact curing time when we finish.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can you repair a failed DIY repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why choose Surface Doctor in Coton
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- A fixed quote before booking
Read our full price list or guide to resurfacing and replacement costs.
How the visit works
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take two to three hours for most chips.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Open a window if you can
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
Get a quote
To get a price, send a couple of photos through our quote form or ring us. We’ll say straight away if a repair is the right fix.
Related advice
Aftercare tips
Once the work has cured, treat it gently:
- Stick to mild cleaners and a soft cloth
- Avoid scourers, wire wool and gritty cream cleaners
- Give the bath a quick rinse after use
- Cover the bath during DIY or decorating
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Common problems we fix in Coton
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
It’s worth getting a quote if you see:
- Holes from dropped items
- Snagging damage from a refit
- A chip where the taps sit
- An old repair that has yellowed or come loose
What your quote should include
- Whether the colour is mixed to match
- Whether the price covers travel
- What the guarantee covers, and for how long
- How soon you can use it again
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
More services for Coton
What a repair cannot fix
Before you book, it’s worth knowing the limits too:
- Cracks in acrylic we cannot reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Coton
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
