Argyll and Bute · Scotland
Bath chip & crack repair in Cove, Argyll and Bute
Bath repair for Cove, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A hole punched through by something heavy
- Rusty patches near the plughole
Cove and the surrounding area
Cove is about 5 miles west of Helensburgh, in Argyll and Bute. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Cove is one of 118 towns and villages in Argyll and Bute where we work. Our jobs stretch from Cove to Glasgow (about 25 miles away).
Here we cover the G84 postcode area. Local streets include Knockderry Road, Shore Road and North Ailey Road, all of which we cover. If you’re just outside Cove, we cover Ardpeaton (2 miles north), Clynder (2 miles north-east), Coulport (3 miles north), Rahane (3 miles north) and Mambeg (4 miles north). Larger places within reach include Helensburgh (5 miles east), Dunoon (4 miles south-west), Rothesay (14 miles south-west), Rhu (3 miles east), Port Bannatyne (13 miles south-west) and Sandbank (4 miles south-west).
Landmarks near Cove
Typical jobs here are in homes near Craigrownie Church. The nearest railway station is Gourock station, roughly 3.3 miles south-east of the centre. Other landmarks nearby include Cowal Community Hospital (4.3 miles south-west) and Cove Castle (0.5 miles south). Not far away are Loch Loskin and Lyle Hill.
About our bath repair in Cove
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. If you are dealing with a cracked acrylic bath and a hole punched through by something heavy, we can normally put it right.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Cove (G84)
- Area hub
- Argyll and Bute
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
When to call us in Cove
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
The most common problems we are called about are:
- Impact holes in acrylic
- Snagging damage from a refit
- Rust spots around the plughole
- A chipped rim or side
Before booking anyone
- A fixed price, and whether VAT is included
- Whether there are any call-out or travel charges
- What prep work is covered
- What the guarantee covers, and for how long
What we can’t put right
We will always be straight with you, so here’s what a repair will not do:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
What we do, step by step
The work is clean and fairly quiet. Protection goes down first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
How to get a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
What bath repair costs
Repairs from £95. There’s no charge for travel to Cove. The price comes down to:
- Whether we combine several jobs
- Unusual colours or finishes
- How easy the damage is to reach
- The type of damage
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Your postcode, so we can check dates
Upload pictures of the damage and one of the entire item, with your G84 postcode, and we will reply with a fixed quote.
Work for landlords and builders
For anyone letting property in or around Cove, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Don’t leave razors or cans standing in the bath
- Protect the bath with a towel when doing jobs nearby
- Rinse it down after each bath
- Have new chips seen to early
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Places near Cove
Other services in Cove
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Your questions about bath repair in Cove
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
About our accreditations · Every repair comes with a one-year guarantee.
