Oxfordshire · England
Bath chip & crack repair in Cowley, Oxfordshire
Bath repair across Cowley and nearby, usually in one visit and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Rust spots around the plughole
Bath repair in Cowley without replacing anything
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We are frequently asked to fix a kit repair that didn’t last and rust by the waste and overflow, in acrylic, pressed steel enamel and roll-top & freestanding.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Cowley (OX4, OX3)
- Region
- Oxfordshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Cowley questions
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover Cowley?
We do. We send a technician to Cowley for every job, with no extra charge for travel.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How long before I can use the bath?
Usually within a day, though it depends on what we’ve done.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Keeping it looking good
To keep it looking its best:
- Do not scrub with anything abrasive
- Clean with warm water and a mild detergent
- Rinse it down after each bath
- Keep metal cans and razors off the surface
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Cowley and the surrounding area
Cowley is about 1 mile south-east of Oxford, in Oxfordshire. We travel to clients in Cowley, so there’s no workshop to go to. Our repair technicians cover 443 places in Oxfordshire. You can also see our page for London, about 51 miles away.
All of OX4 and OX3 is within our area. From Barns Road, Marsh Road and Clive Road or anywhere nearby, a technician can come to you. Other places close to Cowley include Iffley (1 mile west), Blackbird Leys (1 mile south), Donnington (1 mile north-west), Littlemore (1 mile south-west) and Oxford (1 mile north-west). We also work in nearby towns such as Didcot (9 miles south), Bicester (12 miles north), Abingdon-on-Thames (5 miles south-west), Witney (12 miles west), Thame (10 miles east) and Wantage (13 miles south-west).
Near you in Cowley
Our clients here include homes close to Emmanuel Christian School, Church of St Luke and South Park. Nearby too are The Nelson pub (within half a mile south-west), Alexander Library of Ornithology (1.9 miles north-west), Our Lady's Roman Catholic Primary School (within half a mile east) and Greyfriars Catholic School (0.6 miles north-west). Cowley’s nearest station is Oxford station, about 2.7 miles north-west. A little further out are Templars Square (within half a mile south-west) and British Tattoo History Museum (0.7 miles north-west). Green spaces nearby include Headington Hill and CS Lewis Nature Reserve.
Landlords, agents and businesses in Cowley
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. The price reflects the work involved, not where you live. You’ll see the full price before booking, with no extras added later.
Why choose Surface Doctor in Cowley
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- We will tell you if it’s not worth repairing
- Colour-matched on site
Read our prices page or guide to resurfacing and replacement costs.
Towns and villages near Cowley
Other services in Cowley
What we can’t put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Previous DIY repairs that have to come out
- How easy the damage is to reach
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Two or three clear photos are generally enough. Try to include:
- Details of any past repairs
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
For a price in Cowley, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a morning or an afternoon.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Open a window if you can
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will say immediately if a repair is the right fix.
Read more
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
