Powys · Wales
Bath Repair for Craig-y-penrhyn homes
Our technicians come to Craig-y-penrhyn for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- Rust spots around the plughole
Questions from Craig-y-penrhyn
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Are there extra charges for Craig-y-penrhyn?
Travel is included in the price, with the same prices everywhere we work.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Bath repair at your home in Craig-y-penrhyn
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. You can usually use the bath the next day. Our repair technicians work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and common reasons people get in touch are a failed DIY repair that’s discoloured or lifting and chips under the taps.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Craig-y-penrhyn (SY20)
- Area hub
- Powys
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Craig-y-penrhyn
Other services in Craig-y-penrhyn
What affects the price in Craig-y-penrhyn
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- What kind of damage it is
- How many items we do on one visit
- The size and number of damaged areas
- How hard the colour is to match
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- Any earlier repairs or coatings
- One picture of the whole bath
- Natural light rather than flash
- Your postcode, so we can check dates
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a few hours, depending on the damage, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Make sure the room can be ventilated
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Related advice
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How to care for the repair
Once the work has cured, treat it gently:
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
- Stick to mild cleaners and a soft cloth
- Don’t leave a fresh chip for long
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
About Craig-y-penrhyn
Craig-y-penrhyn is about 8 miles north-east of Aberystwyth, in Powys. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We work in 234 places in Powys. Our nearest city page is Liverpool, about 76 miles away.
Our technicians cover all of SY20 and the streets around it. Whether you live on North Road and Cae Bitffald or a nearby road, a technician can come to you. Neighbouring places we cover include Llangynfelyn (1 mile south-west), Tre'r-ddol (1 mile south-east), Ceulanamaesmawr (2 miles south), Tal-y-bont (2 miles south) and Penhelyg (3 miles north-west).
Near you in Craig-y-penrhyn
Our clients here include homes close to St Cynfelyn's Church and The Wildfowler pub, among other places. The nearest railway station is Penhelig station, roughly 3 miles north-west of the centre. Further afield, we also cover the area around Yr Hen Gapel Museum (less than half a mile south-east) and Aberdyfi Castle (3.2 miles north-east). Not far away are Ynys-hir RSPB reserve and Ynys Llancynfelyn.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
When a repair is not the answer
In fairness, some problems need a different fix:
- Acrylic cracks with no access behind them
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- One-year guarantee on every repair
- No extra charge for your area
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or resurfacing vs replacement cost guide.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
