Hampshire · England
Bath Repair for Crampmoor homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Crampmoor, with a one-year guarantee on every repair.
- Repairs from £95
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
Signs you need bath repair in Crampmoor
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
The most common problems we’re called about are:
- An old repair that has yellowed or come loose
- Damage beneath the taps
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
Questions to ask before booking
- How to care for the finish
- How soon you can use it again
- How your room will be protected
- Whether the price is fixed and includes VAT
About our bath repair in Crampmoor
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Typical jobs include chips along the edge of the bath and an old repair that has yellowed or come loose, across cast iron enamel, whirlpool & spa baths and roll-top & freestanding.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Location
- Crampmoor (SO51)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. There’s no charge for travel to Crampmoor. The price comes down to:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- How much damage there is
- What the surface is made of
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Two or three clear photos are normally enough. It helps if you send:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Details of any past repairs
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Towns and villages near Crampmoor
Other services in Crampmoor
Our work in Crampmoor
Crampmoor is about 1 mile north-east of Romsey, in Hampshire. Jobs in Crampmoor are booked in like any other job: a fixed price from your photos, then a visit to do the work. Crampmoor is one of 683 towns and villages in Hampshire where we work. We work right across the region, from Crampmoor to London (about 68 miles away).
Every address in SO51 is within our area. Streets in the area include The Straight Mile and Crampmoor Lane, and we cover them all. Nearby, we also work in Gosport (1 mile east), Ampfield (1 mile east), Abbotswood (1 mile west), Braishfield (1 mile north) and Knapp (2 miles north-east). Larger places within reach include Winchester (7 miles north-east), Eastleigh (5 miles south-east), Fareham (15 miles south-east), Andover (14 miles north), Totton (6 miles south) and Chandler's Ford (3 miles south-east).
What’s near Crampmoor
Around Crampmoor, we work in homes near Hunters Inn Public House, Cupernham Infant School and St Swithun's Church, among other places. For rail, the closest station is Romsey station, about 1.8 miles south-west. Other landmarks nearby include Romsey Extra (2.7 miles south-west) and Romsey Community Hospital (1.4 miles south-west). For a walk, there is Emer Bog and Baddesley Common.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Rinse it down after each bath
- Do not leave razors or cans standing in the bath
- If an acrylic bath flexes, have its feet adjusted
- A dripping tap stains enamel, so fix it early
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
FAQs for Crampmoor
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
How long before I can use the bath?
Normally by the following day, depending on the repair.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the following day, the bath is ready to use.
How to prepare
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Ask for a price
Email us a picture of the damage and one of the whole item, with your SO51 postcode, and we will reply with a fixed quote.
Advice
What we cannot put right
Some jobs are not right for a repair, including:
- Cracks in acrylic we can’t reach from underneath
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we’ll tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
