Dorset · England
Bath chip & crack repair in Creech, Dorset
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Creech, with a one-year guarantee on every repair.
- Repairs from £95
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
Our work in Creech
Creech is about 9 miles south-west of Poole, in Dorset. Customers in Creech get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Creech is one of 462 places in Dorset we cover.
Our technicians cover all of BH20 and the streets around it. Neighbouring places we cover include Stoborough Heath (1 mile north-east), Stoborough Green (2 miles north), Stoborough (2 miles north), East Holme (2 miles north-west) and Worgret (3 miles north). Within a short drive, we also cover Weymouth (15 miles west), Dorchester (15 miles west), Wimborne Minster (13 miles north-east), Blandford Forum (15 miles north), Ferndown (15 miles north-east) and Broadstone (10 miles north-east).
Around Creech
We visit homes around Stonehill Down Nature Reserve, among other places. The closest station to Creech is Wareham station, roughly 3.2 miles north of the centre. Well-known places in the area include The Etches Collection (1.9 miles south) and Arne (2.2 miles north). Green spaces nearby include Creech Barrow Hill and Arne RSPB reserve.
Bath repair in Creech without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Typical jobs include cracks in an acrylic bath and scratches you can feel with a fingernail, across pressed steel enamel, acrylic and whirlpool & spa baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Creech (BH20)
- Region
- Dorset
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Creech
More services for Creech
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave a fresh chip for long
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What we can’t put right
It helps to know what we cannot do:
- Rust that has eaten right through a steel bath
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Creech
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What affects the price in Creech
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- How hard the colour is to match
- The material
- Where the damage is and how we get to it
- How much damage there is
We charge the same wherever you are, with no extra for Creech. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- Details of any past repairs
- Your postcode, so we can check dates
- Something in shot to show the size
- One sharp close-up of the damage
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
FAQs for Creech
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Do you work in Creech?
Yes. We work across the UK and come to Creech and the rest of Dorset. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you cover the whole of Dorset?
We cover the entire UK, including Creech and the rest of Dorset. Just include your postcode and we will confirm dates.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Common problems we fix in Creech
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Common reasons people in Creech contact us are:
- Chips along the edge of the bath
- Damage beneath the taps
- A hole punched through by something heavy
- Chips caused by builders
Before booking anyone
- Who turns up on the day
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- How your room will be protected
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
