South Lanarkshire · Scotland
Bath chip & crack repair in Crossford, South Lanarkshire
Bath repair in Crossford without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A hole punched through by something heavy
- Damage beneath the taps
About our bath repair in Crossford
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. If you are dealing with scratches you can feel with a fingernail and a cracked acrylic bath, we can generally put it right.
Big or small, it’s backed by a one-year guarantee.
- Area
- Crossford (ML8)
- Region
- South Lanarkshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the day after, the bath is ready to use.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
How to get a price
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Questions from Crossford
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Do you cover Crossford?
We do. We send a technician to Crossford for every job, and the price is the same as everywhere else.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover the entire of South Lanarkshire?
We cover the whole UK, including Crossford and the rest of South Lanarkshire. Just include your postcode and we will offer you dates.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
What affects the price in Crossford
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Doing more than one item at once
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- A clear, close picture of the problem area
- Any details about the material
- A photo taken from further back
- Your postcode, so we can check dates
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Covering Crossford
Crossford is about 3 miles south-west of Carluke, in South Lanarkshire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Crossford is one of 139 towns and villages in South Lanarkshire we cover. Our jobs stretch from Crossford to Glasgow (19 miles away).
Our technicians cover all of the ML8 postcode area. From Holm Road, Smugglers Brig Road and Dark Brig Road or anywhere nearby, a technician can come to you. If you are just outside Crossford, we cover Braidwood (1 mile north-east), Carluke (3 miles north-east), Law (4 miles north), Wildmanbridge (4 miles north) and Bogside (4 miles north). Larger places within reach include East Kilbride (13 miles west), Hamilton (9 miles north-west), Cambuslang (14 miles north-west), Uddingston (12 miles north-west), Blantyre (11 miles north-west) and Larkhall (5 miles north-west).
Near you in Crossford
Typical jobs here are in homes near Crossford Church, among other places. The closest station to Crossford is Carluke station, roughly 2.2 miles north. A little further out are Tower of Hallbar (0.7 miles east) and William Smellie Memorial Hospital (3.3 miles south-east). The countryside around Crossford includes Black Hill and Lanark Loch.
When we’d advise against a repair
Before booking, it’s worth knowing the limits:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
What else we do in Crossford
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Repair or replace in Crossford?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. We charge the same wherever you are, with no extra for Crossford. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- One visit for most repairs
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- Nothing taken out or refitted
See our full price list or bath cost comparison.
Landlord and trade work in Crossford
Housing associations and facilities teams use us for planned and reactive repairs in South Lanarkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
If you manage property in Crossford, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Have new chips seen to early
- Get a dripping tap fixed promptly
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you’re working above it
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
