South Ayrshire · Scotland
Bath chip & crack repair in Crosshill, South Ayrshire
Bath repair across Crosshill and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Cracks in an acrylic bath
What we’re called out for in Crosshill
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
The most common problems we’re called about are:
- Scratches you can feel with a fingernail
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- A chipped rim or side
What to look for in a quote
- How to look after the finish
- Who will actually do the work
- How your room will be protected
- What happens if the damage is worse than the photos show
About our bath repair in Crosshill
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with snagging damage from a refit and damage beneath the taps, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Crosshill (KA19)
- Area hub
- South Ayrshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Crosshill and nearby
Crosshill is about 9 miles south of Ayr, in South Ayrshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Crosshill is one of 52 places in South Ayrshire where we work. Our jobs stretch from Crosshill to Glasgow (39 miles away).
Here we cover the KA19 postcode area. That includes homes on Bruce Square, Kirkbride Crescent and Newton Street. We also cover the places around Crosshill: Kirkmichael (2 miles north-east), Maybole (3 miles north-west), Straiton (4 miles east), Minishant (5 miles north) and Dailly (5 miles south-west). Further out, we also cover Ayr (9 miles north), Prestwick (12 miles north), Heathfield (11 miles north), Belmont (9 miles north), Forehill (9 miles north) and Girvan (10 miles south-west).
Local landmarks in Crosshill
We visit homes around Crosshill and the streets around them. The closest station to Crosshill is Maybole station, roughly 2.7 miles north-west of the centre. Further afield, we also cover the area around Kilhenzie Castle (1.5 miles north-west). Green spaces nearby include Lochspouts and Kirk Hill.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Towns and villages near Crosshill
What else we do in Crosshill
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Do not scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
- Rinse it down after each bath
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Prices and what affects them
Repairs from £95. There is no charge for travel to Crosshill. The price depends on:
- Any earlier repairs that need removing first
- The colour and finish to match
- Doing more than one item at once
- The size and number of damaged areas
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Email us pictures of the damage and a wider shot of the whole item, with your KA19 postcode, and we’ll come back with a fixed quote.
The process
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Before we arrive
- Let the surface dry out before the visit
- Clear the area around the damage
- Open a window if you can
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Read more
What a repair cannot fix
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Crosshill. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Free fixed quotes from pictures
- Generally one visit, start to finish
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
Take a look at our pricing or bath cost comparison.
Crosshill questions
When can I have a bath again?
Most baths can be used the following day. We confirm the time before we leave.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
What areas do you cover?
Everywhere in the UK, Crosshill included. There is no extra charge for travel.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
How much does bath repair cost in Crosshill?
Repairs from £95. We give a fixed price based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
About our accreditations · Every repair comes with a one-year guarantee.
