South Ayrshire · Scotland
Bath chip & crack repair in Belmont, South Ayrshire
Our repair technicians come to Belmont for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Impact holes in acrylic
Landlords, agents and businesses in Belmont
We work for landlords, letting agents and housing providers in Belmont as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
About our bath repair in Belmont
Most of our bath repairs take a few hours, and the bath is back in use the following day. You won’t need a plumber or tiler, because the bath doesn’t move. Whether it’s rusty patches near the plughole and hairline or through cracks in acrylic, we can help, whatever the material.
You get a one-year guarantee, the same in Belmont as everywhere else we work.
- Area
- Belmont (KA7, KA8)
- Area hub
- South Ayrshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why Belmont clients choose us
- No extra charge for your area
- Technicians who travel to you, UK-wide
- One visit for most repairs
- Colour mixed on the day to match
Take a look at our prices page and guide to resurfacing and replacement costs.
What a repair cannot fix
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Belmont. The price reflects:
- Whether we combine several jobs
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- The material
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Send photos for a quote
Before you send photos, a few simple things make all the difference:
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Our work in Belmont
Belmont is about 1 mile south of Ayr, in South Ayrshire. Anywhere in KA7, we carry out the work at your property. Belmont is one of 52 towns and villages in South Ayrshire where we work. Our nearest city page is Glasgow, about 31 miles away.
Every address in KA7 and KA8 is covered. We regularly work on streets such as Midton Road, Morton Road and Carrick Road and the roads around them. You will find Belmont on the A70 and A79, which makes it straightforward to reach. Neighbouring places we cover include Ayr (1 mile north), Forehill (1 mile east), Seafield (1 mile west), Montgomerieston (1 mile north-west) and Alloway (1 mile south). Within a short drive, we also cover Troon (7 miles north), Prestwick (3 miles north), Maybole (7 miles south), Drongan (6 miles east), Joppa (4 miles east) and Barassie (8 miles north). As one of the bigger places in South Ayrshire, Belmont is somewhere we visit often.
What’s near Belmont
Typical jobs here are in homes near Ayr, Belmont Academy and Railway Tavern, among other places. The nearest railway station is Ayr station, about 0.5 miles north of the centre. Nearby you will also find Ayr Central (0.7 miles north) and Tam Oshanter Museum (0.8 miles north). For a walk, there’s Carcluie Loch.
Belmont questions
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
How to look after the repair
Most damage we see is avoidable. These habits help:
- Don’t scrub with anything abrasive
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
- Have new chips seen to early
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we’ll talk to you before going ahead.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Point us to the nearest place to park
- Open a window if you can
- Mention any earlier repairs or resurfacing
Getting a price
If you are in Belmont and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
What else we do in Belmont
About our accreditations · Every repair comes with a one-year guarantee.
