Dumfries and Galloway · Scotland
Bath chip & crack repair in Crossmichael, Dumfries and Galloway
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Crossmichael and across Dumfries and Galloway. Free, fixed quotes from your photos.
- Repairs from £95
- A chipped rim or side
- A hole punched through by something heavy
How we handle bath repair in Crossmichael
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. We work on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are impact holes in acrylic and an old repair that has yellowed or come loose.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Crossmichael (DG7)
- Region
- Dumfries and Galloway
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Crossmichael
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Cover the bath during DIY or decorating
- Don’t leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Your questions about bath repair in Crossmichael
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you come to Crossmichael?
Yes. We work across the UK and come to Crossmichael and the rest of Dumfries and Galloway. Send us photos for a fixed quote, or call 0345 017 0787.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Crossmichael and nearby
Crossmichael is about 16 miles south-west of Dumfries, in Dumfries and Galloway. Wherever you are in the DG7 postcode area, a technician comes to you. Our technicians cover 138 places in Dumfries and Galloway, from the larger towns to small villages. We work right across the region, from Crossmichael to Glasgow (about 62 miles away).
Our repair technicians cover all of the DG7 postcode area and the streets around it. You’ll find streets such as Main Street, St Michael's Road and St Michael's Crescent. We also cover the places around Crossmichael: Glenlochar (1 mile south), Castle Douglas (3 miles south-east), Kirkpatrick Durham (4 miles north-east), Bridge of Dee (4 miles south) and Kelton Hill (4 miles south). Further out, we also cover Kirkcudbright (10 miles south), Dalbeattie (7 miles south-east) and Gatehouse of Fleet (10 miles south-west).
What’s near Crossmichael
Locally, our jobs take us to homes close to Balmaghie Parish Church And Churchyard, among other places. Nearby you’ll also find Castle Douglas Art Gallery (3.3 miles south-east). Green spaces nearby include Barstobrick Hill and Erncrogo Loch.
Places near Crossmichael
Other services in Crossmichael
Why repair rather than replace?
Swapping a damaged bath for a new one typically means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in one visit. Prices start from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Crossmichael
- We leave the room as we found it
- No extra charge for your area
- One visit for most repairs
- Honest advice, even when it means no job
Take a look at our full price list or bath cost comparison.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. It generally takes a few hours, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
When to call us in Crossmichael
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Signs it’s time to call us include:
- A chipped rim or side
- Cracks in an acrylic bath
- Holes from dropped items
- Scratches you can feel with a fingernail
Before booking anyone
- How the room is protected while they work
- What happens if the damage is worse than the pictures show
- Who will actually do the work
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
