Herefordshire · England
Bath chip & crack repair in Crowmoor, Herefordshire
Our technicians come to Crowmoor for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Rust by the waste and overflow
- Impact holes in acrylic
Bath repair in Crowmoor without replacing anything
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We work on acrylic, pressed steel enamel and roll-top & freestanding, and people most frequently call us about deep scratches in acrylic and chips under the taps.
Every job is backed for twelve months in Crowmoor and everywhere else. We return to put right any problem with the work.
- Where
- Crowmoor (HR4)
- Area hub
- Herefordshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
When we’d advise against a repair
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Acrylic cracks with no access behind them
- Wear across the entire surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- The material and finish
- The type of damage
- Any earlier repairs that need removing first
- Access to the area
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- The material, if you know it
For a price in Crowmoor, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Crowmoor and nearby
Crowmoor is about 4 miles north-west of Hereford, in Herefordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Crowmoor is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from Crowmoor to Birmingham (about 46 miles away).
We work across HR4. Other places close to Crowmoor include Stretton Sugwas (1 mile south), Burghill (1 mile south-east), Upper Lyde (2 miles east), Swainshill (2 miles south) and Huntington (2 miles south-east). Within a short drive, we also cover Hereford (4 miles south-east), Ross-on-Wye (15 miles south-east), Leominster (9 miles north), Redhill (5 miles south-east), Newton Farm (4 miles south-east) and Whitecross (3 miles south-east).
Landmarks near Crowmoor
Around Crowmoor, we work in homes near Church of St Mary, Burghill Community Academy and Whitecross Hereford, among other places. The closest station to Crowmoor is Hereford station, about 4.1 miles south-east. Other landmarks nearby include St. Mary's Hospital (1.4 miles south-east) and Mansell Lacy Moat (2.4 miles west). Open spaces near Crowmoor include Merryhill and Wyevale Wood.
Nearby places to Crowmoor
Other services in Crowmoor
What we do, step by step
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, depending on the damage. Before we go, we will explain when it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Advice
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Crowmoor clients choose us
- Most jobs done in one visit
- Straight answers about what a repair can do
- One-year guarantee on every repair
- A fixed quote before you book
Take a look at our pricing and resurfacing vs replacement cost guide.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Common questions in Crowmoor
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
What happens next?
We review the pictures and send a fixed quote.
How much does bath repair cost in Crowmoor?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you need bath repair in Crowmoor?
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Contact us if you’ve noticed any of these:
- Chips caused by builders
- A kit repair that didn’t last
- A hole punched through by something heavy
- Chips on the rim or sides
What to look for in a quote
- Whether they match the colour on site
- How changes to the job are handled
- If travel is included in the price
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
