Devon · England
Bath Repair for Cullompton homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Cullompton and across Devon. Free, fixed quotes from your photos.
- Repairs from £95
- Impact holes in acrylic
- Chips on the rim or sides
Bath repair in Cullompton without replacing anything
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Typical jobs include scratches you can feel with a fingernail and snagging damage from a refit, across pressed steel enamel, cast iron enamel and whirlpool & spa baths.
You get a one-year guarantee, the same in Cullompton as everywhere else we work.
- Location
- Cullompton (EX15)
- County
- Devon
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff:
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- If an acrylic bath flexes, have its feet adjusted
- Don’t scrub with anything abrasive
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Our work in Cullompton
Cullompton is about 5 miles south-east of Tiverton, in Devon. Anywhere in EX15, we come to you. We work in all 586 towns and villages across Devon.
All of EX15 is within our area. We regularly work on streets such as Queen Square, Pound Square and High Street and the roads around them. Main roads around Cullompton include the B3181, so getting to you is simple. Nearby, we also work in Stoneyford (1 mile east), Willand (2 miles north-east), Kentisbeare (3 miles east), Norman's Green (3 miles south-east) and Plymtree (3 miles south-east). We also work in nearby towns such as Exeter (11 miles south-west), Tiverton (5 miles north-west), Sidmouth (13 miles south-east), Honiton (10 miles south-east), St Thomas (12 miles south-west) and Larkbeare (11 miles south-west).
Around Cullompton
Locally, our jobs take us to homes close to The White Hart Inn, St Andrew's Primary School and Parish Church of St Andrew, among other places. For rail, the closest station is Tiverton Parkway station, roughly 4.5 miles north. A little further out are Belmont Hospital (5.2 miles north-west) and Bradninch Castle Hill (2.2 miles south-west).
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take a morning or an afternoon.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
How to get a price
Email us pictures of the damage and one of the whole item, and tell us you’re in Cullompton, and we will come back with a fixed quote.
Advice
What affects the price in Cullompton
Prices start from £95. We give every job a fixed quote from photos. These are the things that affect it:
- What kind of damage it is
- How many areas need work
- How hard the colour is to match
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Cullompton. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Natural light rather than flash
- A coin beside the damage so we can judge size
If you are in Cullompton and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
- Most jobs done in one visit
- Colour-matched on site
Read our full price list or bath cost comparison.
When a repair isn’t the answer
It helps to know what we can’t do too:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
Send us pictures and we’ll tell you honestly.
What we work on
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Cullompton: your questions answered
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Is a cracked acrylic bath repairable?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Towns and villages near Cullompton
Also in Cullompton
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Common problems we fix in Cullompton
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Most people contact us after spotting something like this:
- Chips caused by builders
- Impact holes in acrylic
- Rust spots around the plughole
- An old repair that has yellowed or come loose
What your quote should include
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- How soon you can use it again
- What prep work is covered
Landlord and trade work in Cullompton
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Cullompton as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
