Devon · England

Bath Repair in Larkbeare

Fixed-price bath repair in Larkbeare and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Holes from dropped items
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Larkbeare

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Devon and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

Bath repair in Larkbeare without replacing anything

We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our repair technicians work on acrylic, pressed steel enamel and cast iron enamel, and common reasons people contact us are rust by the waste and overflow and impact holes in acrylic.

All our work is covered by a one-year guarantee, wherever you are in Devon.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Larkbeare (EX2, EX1, EX4)
County
Devon
Warranty
A year, on every repair
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

Questions from Larkbeare

I tried a repair kit. Can you fix it?

Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

Can you repair a crack in an acrylic bath?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

What does bath repair cost?

Prices start from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your EX2 postcode.

Can you price it without visiting?

Nearly always. If photos don’t show enough, we will ask for another angle.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

What bath repair costs

Repairs from £95. We don’t charge extra for travel to Larkbeare. The price comes down to:

  • Whether old repairs or coatings need taking off
  • Access to the area
  • The material
  • The colour and finish to match

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Send photos for a quote

Before you send photos, these tips help us give you a firm price:

  • Something in shot to show the size
  • Natural light rather than flash
  • The postcode, so we can plan the visit
  • Whether it’s been repaired or coated before

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Aftercare tips

Once the work has cured, treat it gently:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Keep metal cans and razors off the surface
  • Don’t scrub with anything abrasive
  • Do not leave a fresh chip for long

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

What happens on the day

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes a few hours, depending on the damage. If anything looks different from your pictures, we will talk to you before going ahead.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Tell us about any previous repairs or coatings
  • Move bottles, mats and clutter away from the area
  • Point us to the nearest place to park

How to get a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a free quote

Related advice

What we are called out for in Larkbeare

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Most people get in touch after spotting one of these:

  • Cracks in an acrylic bath
  • Chips along the edge of the bath
  • Snagging damage from a refit
  • Rust spots around the plughole

What to look for in a quote

  • How the colour is matched
  • How changes to the job are handled
  • The length of the guarantee and what it covers
  • How the room is protected while they work

Choosing a repair company

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Larkbeare and nearby

Larkbeare is about 1 mile south-west of Exeter, in Devon. Anywhere in EX2, a technician comes to you. Larkbeare is one of 586 towns and villages in Devon where we work.

We cover every part of EX2, EX1 and EX4 and the streets around it. Jobs here include addresses on Tan Lane, Isca Road and Haven Road and the roads around them. We also cover the places around Larkbeare: St Thomas (1 mile west), Exeter (1 mile north-east), Heavitree (1 mile east), Wonford (1 mile east) and Alphington (1 mile south). Larger places within reach include Exmouth (8 miles south-east), Newton Abbot (13 miles south), Tiverton (13 miles north), Teignmouth (11 miles south), Sidmouth (13 miles east) and Kingsteignton (12 miles south).

Local landmarks in Larkbeare

Typical jobs here are in homes near Exeter Tutorial College, Port Royal Inn and Church of St Leonard. Other local landmarks include Exeter University Library (1.4 miles north), Ludwell Valley Park (1.4 miles east), West Exe School (0.9 miles south-west) and Sacred Heart Church (within half a mile north-west). For rail, the closest station is Exeter St Thomas station, roughly 0.6 miles west of the centre. Further afield, we also cover the area around Rougemont Castle (0.7 miles north) and Exeter City Football Club Museum (1 mile north). Open spaces near Larkbeare include Bowling Green Marsh RSPB reserve.

  • Local schools include St Leonard's (CofE) Primary School (VC) (within half a mile east)
Map of Larkbeare © OpenStreetMap contributors

Repairing versus replacing in Larkbeare

Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. We charge the same wherever you are, so there is no premium for Larkbeare. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • Normally one visit, start to finish
  • We leave the room as we found it
  • No need to remove anything
  • A year’s guarantee on all work

See our full price list and resurfacing vs replacement cost guide.

Honest limits

Honesty matters more than a booking, so here’s what a repair will not do:

  • Water coming from the waste or taps rather than the bath
  • A steel bath rusted through
  • Cracks in acrylic we can’t reach from underneath

Send us photos and we’ll tell you honestly before you book.

Materials we repair

  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.