Somerset · England
Bath Repair for Curload homes
Local bath repair for Curload: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- A hole punched through by something heavy
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
About our bath repair in Curload
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Common call-outs are for cracks in an acrylic bath and rusty patches near the plughole, across cast iron enamel, acrylic and whirlpool & spa baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Where
- Curload (TA3)
- County
- Somerset
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Technicians who travel to you, UK-wide
- Everything repaired in place
- Colour-matched on site
- We leave the room as we found it
Read our full price list and bath cost comparison.
When to call us in Curload
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
Keep an eye out for any of the following:
- Damage beneath the taps
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
Before booking anyone
- Who turns up on the day
- How changes to the job are handled
- The length of the guarantee and what it covers
- When it can be used again
FAQs for Curload
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How long does the repair take to cure?
Typically within a day, though it depends on what we’ve done.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
What happens next?
We review the pictures and send a fixed quote with dates.
Do you cover Curload?
We do. Repair technicians travel to Curload from across the region, and the price is the same as everywhere else.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Curload and nearby
Curload is about 6 miles south-east of Bridgwater, in Somerset. From the centre of Curload to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Curload is one of 640 towns and villages in Somerset we cover.
All of TA3 is covered, from the main roads to the quietest streets. Local streets include Crooked Drove and Stanmoor Mead Drove, and we cover them all. We also travel to East Lyng (1 mile north-west), Stoke St Gregory (1 mile south-east), Athelney (1 mile north-east), Lyng (1 mile west) and Huntham (1 mile south). We also work in nearby towns such as Taunton (7 miles west), Bridgwater (6 miles north-west), Yeovil (15 miles south-east), Chard (12 miles south), Burnham-on-Sea (13 miles north) and Wellington (13 miles west).
What’s near Curload
Typical jobs here are in homes near Royal Oak pub, Stoke St Gregory Church of England Primary School and Church of St Bartholomew and the streets around them. Nearby you will also find Willows and Wetlands Visitor Centre (0.5 miles south-east). For a walk, there is Burrow Mump and West Sedgemoor RSPB reserve.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Clean with warm water and a mild detergent
- If an acrylic bath flexes, have its feet adjusted
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Nearby places to Curload
What else we do in Curload
The process
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the next day.
How to prepare
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Read more
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
