Neath Port Talbot · Wales
Bath chip & crack repair in Cwmbychan, Neath Port Talbot
Our repair technicians come to Cwmbychan for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Holes from dropped items
Common questions in Cwmbychan
Do you cover the whole of Neath Port Talbot?
We cover the whole UK, including Cwmbychan and the rest of Neath Port Talbot. Just include your postcode and we’ll confirm dates.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
How do I get a price for bath repair in Cwmbychan?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
How we handle bath repair in Cwmbychan
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Typical jobs include chips caused by builders and a cracked acrylic bath, in acrylic, pressed steel enamel and cast iron enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Cwmbychan (SA12)
- County
- Neath Port Talbot
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Cwmbychan
Other services in Cwmbychan
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Prices and what affects them
Prices start from £95. There is no area surcharge for Cwmbychan. The price reflects:
- Any earlier repairs that need removing first
- How many items we do on one visit
- The type of damage
- Unusual colours or finishes
The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Natural light rather than flash
- A photo taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
About Cwmbychan
Cwmbychan is about 2 miles north-east of Port Talbot, in Neath Port Talbot. Across the SA12 area, a technician comes to you. Cwmbychan is one of 100 places in Neath Port Talbot where we work.
Here we cover the SA12 postcode area. Whether you live on Brynna Road and Heol y Bwlch or a nearby road, a technician can come to you. We also cover the places around Cwmbychan: Brynbryddan (1 mile south), Cwmavon (1 mile east), Caerhendy (1 mile south), Corlannau (1 mile south) and Pwll-y-glaw (1 mile east). Within a short drive, we also cover Neath (3 miles north-west), Mount Pleasant (3 miles north-west), Sandfields West (3 miles south-west), Sandfields East (3 miles south-west), Pontardawe (8 miles north-west) and Glyn-neath (11 miles north-east).
Near you in Cwmbychan
Around Cwmbychan, we work in homes near Church of St Michael, Tafarn y Bwlch pub and St Joseph's RC School and 6th Form Centre, among other places. Cwmbychan’s nearest station is Baglan station, roughly 1.5 miles west. A little further out are Pelenna (1.9 miles north-east) and Aberafan Centre (1.6 miles south). Green spaces nearby include Mynydd-y-Gaer and Gnoll Estate Country Park lake 1.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
When a repair is not the answer
A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
The process
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow a morning or an afternoon.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
- Open a window if you can
Ask for a price
To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
What you get with us
- We come to you, anywhere in the UK
- Colour mixed on the day to match
- We leave the room as we found it
- One price list for the whole UK
Read our full price list and bath cost comparison.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
- Put a towel in the bath if you are working above it
- Get a dripping tap fixed promptly
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
About our accreditations · Every repair comes with a one-year guarantee.
