Swansea · Wales
Bath Repair in Cwmrhydyceirw
We travel to Cwmrhydyceirw for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Chips on the rim or sides
Bath repair in Cwmrhydyceirw without replacing anything
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We’re often asked to fix holes from dropped items and cracks in an acrylic bath, on roll-top & freestanding, cast iron enamel and acrylic.
Every job is backed for twelve months in Cwmrhydyceirw and everywhere else. If something goes wrong with the work, we come back.
- Where
- Cwmrhydyceirw (SA6)
- County
- Swansea
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Cwmrhydyceirw
Cwmrhydyceirw is about 1 mile north-east of Morriston, in Swansea. Across the SA6 area, a technician comes to you. We cover 153 places in Swansea, from the larger towns to small villages.
All of SA6 is covered, from the main roads to the quietest streets. That includes homes on Park Road, Gwysfa Road and Bwllfa Road and the roads around them. With the M4 close by, Cwmrhydyceirw is simple for us to get to. Other places close to Cwmrhydyceirw include Ynystawe (1 mile north-east), Ynysforgan (1 mile south), Cwm-felin-fach (1 mile south), Cae-mawr (1 mile north-east) and Quarr-Clydach (1 mile north). We also work in nearby towns such as Swansea (4 miles south-west), Castle (4 miles south), Mount Pleasant (4 miles south), Gorseinon (6 miles west), Dyfaty (4 miles south) and Uplands (5 miles south-west).
Local landmarks in Cwmrhydyceirw
We visit homes around Morriston Comprehensive School, Ynystawe Primary School and Millers Arms. Cwmrhydyceirw’s nearest station is Llansamlet station, about 1.9 miles south-east. Well-known places in the area include Welsh Museum of Fire (2.9 miles south-east) and Mound (2.8 miles east). For a walk, there’s Pluck Lake and Cwm Clydach RSPB Reserve.
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- A year’s guarantee on all work
- We’ll tell you if it’s not worth repairing
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
Read our prices page or resurfacing vs replacement cost guide.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Prices and what affects them
Prices start from £95. We do not charge extra for travel to Cwmrhydyceirw. The price depends on:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- The material
- How many areas need work
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Getting a price from photos
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- One picture of the entire bath
The quickest way to a price is to send a couple of photos through our quote form or call us. We will say immediately whether it can be repaired.
The process
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
Getting a price
For a price in Cwmrhydyceirw, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
When we’d advise against a repair
It helps to know what we can’t do too:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Keeping it looking good
To keep it looking its best for years:
- Store metal items away from the bath
- Protect the bath with a towel when doing jobs nearby
- Avoid scourers, wire wool and gritty cream cleaners
- Make sure an acrylic bath is firm underfoot
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Cwmrhydyceirw: your questions answered
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Are there extra charges for Cwmrhydyceirw?
Travel is included in the price, with the same prices everywhere we work.
Landlords, agents and businesses in Cwmrhydyceirw
Landlords, letting agents and housing providers in Cwmrhydyceirw use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Nearby places to Cwmrhydyceirw
More services for Cwmrhydyceirw
About our accreditations · Every repair comes with a one-year guarantee.
