Lancashire · England
Bath chip & crack repair in Dam Side, Lancashire
Bath repair in Dam Side without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Chips along the edge of the bath
- Rusty patches near the plughole
Bath repair in Dam Side without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We regularly repair acrylic, roll-top & freestanding and whirlpool & spa baths, and people most often call us about rust by the waste and overflow and holes from dropped items.
All our work is covered by a one-year guarantee.
- Where
- Dam Side (PR3)
- County
- Lancashire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath repair in Dam Side
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.
The most common problems we are called about are:
- A kit repair that didn’t last
- A cracked acrylic bath
- Chips caused by builders
- A chipped rim or side
Questions to ask before you book
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
- What the guarantee covers, and for how long
- What protection goes down before work starts
Nearby places to Dam Side
Other services in Dam Side
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price depends on:
- Any earlier repairs that need removing first
- What kind of damage it is
- How many items we do on one visit
- Unusual colours or finishes
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
Phone photos are fine. Ensure they show:
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Our work in Dam Side
Dam Side is about 5 miles east of Fleetwood, in Lancashire. Jobs in Dam Side are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover 482 places across Lancashire, from the larger towns to small villages. You can also see our page for Liverpool, about 36 miles away.
Here we cover the PR3 postcode area. Other places close to Dam Side include Fisher's Row (1 mile south-east), Pilling (1 mile west), Stake Pool (1 mile south-east), Smallwood Hey (1 mile west) and Scronkey (1 mile south). Further out, we also cover Preston (14 miles south-east), Lancaster (9 miles north-east), Lytham St Anne's (13 miles south), Morecambe (10 miles north), Fulwood (12 miles south-east) and Fleetwood (5 miles west).
Near you in Dam Side
Around Dam Side, we work in homes near St William's Catholic Primary School, Golden Ball pub and St John the Baptist's Church, among other places. Well-known places in the area include Fleetwood Hospital (4.4 miles west). Not far away are Winmarleigh and Cockerham Moss.
What happens on the day
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow a morning or an afternoon, and we will tell you if anything changes.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Clear the area around the damage
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Ask for a price
Most customers in Dam Side get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Your questions about bath repair in Dam Side
Do you come to Dam Side?
Yes. We work across the UK and travel to Dam Side and the rest of Lancashire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
How do I book?
Use the quote form or ring 0345 017 0787.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can a cracked acrylic bath be fixed?
Usually, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- Straight answers about what a repair can do
- One visit for most repairs
- Work done at your home or business
- No extra charge for your area
Read our full price list or guide to resurfacing and replacement costs.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Looking after it afterwards
How the surface is treated afterwards matters:
- Do not leave razors or cans standing in the bath
- Give the bath a quick rinse after use
- A dripping tap stains enamel, so fix it early
- Make sure an acrylic bath is firm underfoot
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Landlords, agents and businesses in Dam Side
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
