Kent · England
Bath Repair in Danaway
Our repair technicians come to Danaway for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Chips caused by builders
Signs you need bath repair in Danaway
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
These are the problems we’re asked about most:
- Scuffs and scratches in the surface
- Chips caused by builders
- A chip where the taps sit
- A kit repair that didn’t last
What to look for in a quote
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
- How the colour is matched
How we handle bath repair in Danaway
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We are frequently asked to fix rust by the waste and overflow and snagging damage from a refit, on cast iron enamel, acrylic and whirlpool & spa baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Danaway (ME9)
- County
- Kent
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Danaway
What else we do in Danaway
How the visit works
We agree an arrival time beforehand. On site, it takes a few hours. The room is left tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the next day, the bath is ready to use.
How to prepare
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Ask for a price
For a price in Danaway, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Landlords, agents and businesses in Danaway
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
If you manage property in Danaway, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Aftercare tips
Simple care helps the repair last. We recommend:
- Put a towel in the bath if you are working above it
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- Use a soft cloth and washing-up liquid for everyday cleaning
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
FAQs for Danaway
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you cover Danaway?
Yes, we do. We send a technician to Danaway for every job, and the price is the same as everywhere else.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
How long before I can use the bath?
Most baths can be used the following day. We confirm the time before we leave.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
When a repair is not the answer
It helps to know what we cannot do too:
- Cracks in acrylic we cannot reach from underneath
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Danaway
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why choose Surface Doctor in Danaway
- No extra charge for your area
- A year’s guarantee on all work
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
See our pricing or bath cost comparison.
Our work in Danaway
Danaway is about 3 miles west of Sittingbourne, in Kent. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover all 922 towns and villages across Kent. You can also see our page for London, about 35 miles away.
Our technicians cover all of the ME9 postcode area and the streets around it. Jobs here include addresses on Westfield Gardens, Oak Close and Wormdale Hill. If you’re just outside Danaway, we cover Oad Street (1 mile south-east), Chestnut Street (1 mile north-east), Newington (1 mile north), Keycol (1 mile north-east) and Bobbing (1 mile north-east). We also work in nearby towns such as Maidstone (8 miles south-west), Sittingbourne (3 miles east), Gravesend (14 miles north-west), Whitstable (15 miles east), Faversham (9 miles east) and Minster (8 miles north-east).
Around Danaway
Typical jobs here are in homes near Borden Church of England Primary School, Westlands School and Plough & Harrow pub, among other places. For rail, the closest station is Newington station, roughly 1.2 miles north. A little further out are Court Hall Museum (2.7 miles east) and Bayford Court (3 miles east). Green spaces nearby include Detling Hill.
- Parks and local facilities nearby include Sittingbourne and Milton Urban District (2.7 miles east)
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Whether we combine several jobs
- The size and number of damaged areas
- Where the damage is and how we get to it
- The colour and finish to match
Our prices are the same across the UK, so there is no premium for Danaway. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- A picture taken from further back
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- Any details about the material
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
