Kent · England
Bath Repair in Keycol
Local bath repair for Keycol: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rust spots around the plughole
- Impact holes in acrylic
About our bath repair in Keycol
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. We’re often asked to fix scuffs and scratches in the surface and chips along the edge of the bath, in pressed steel enamel, acrylic and whirlpool & spa baths.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Keycol (ME9)
- Area hub
- Kent
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Prices start from £95. There is no charge for travel to Keycol. The price depends on:
- The colour and finish to match
- Whether we combine several jobs
- Where the damage is and how we get to it
- How much damage there is
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
Two or three clear pictures are usually enough. Try to include:
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Our work in Keycol
Keycol is about 2 miles west of Sittingbourne, in Kent. We visit homes and businesses in Keycol and the surrounding area, so nothing has to leave your home. We cover 922 places in Kent. Our nearest city page is London, about 35 miles away.
Our technicians cover all of the ME9 postcode area. That includes homes on Rooks View, Hill Farm View and Rook Lane. Other places close to Keycol include Bobbing (1 mile east), Chestnut Street (1 mile south), Newington (1 mile west), Danaway (1 mile south-west) and Oad Street (2 miles south). Larger places within reach include Maidstone (9 miles south-west), Gravesend (15 miles north-west), Whitstable (15 miles east), Faversham (9 miles east), Minster (7 miles north-east) and Kings Hill (13 miles south-west).
Near you in Keycol
Typical jobs here are in homes near Borden Church of England Primary School, Westlands School and George Inn. Keycol’s nearest station is Newington station, about 1.1 miles west of the centre. Nearby you’ll also find Sittingbourne and Milton Urban District (1.8 miles east) and Bayford Court (2.3 miles east).
Towns and villages near Keycol
Other services in Keycol
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Questions from Keycol
What happens next?
We review the photos and send a fixed quote and the next dates we have.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Do you work in Keycol?
We do. We send a technician to Keycol for every job, and the price is the same as everywhere else.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Aftercare tips
So the finish stays in good condition:
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
- Check that an acrylic bath does not move when you stand in it
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Common problems we fix in Keycol
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we are called about are:
- Rust by the waste and overflow
- A kit repair that didn’t last
- Chips under the taps
- Cracks in an acrylic bath
Comparing quotes
- Whether the price covers travel
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
- When it can be used again
Repair or replace in Keycol?
People often assume a cracked or chipped bath has to come out. Typically it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Why choose Surface Doctor in Keycol
- Normally one visit, start to finish
- Honest advice, even when it means no job
- A year’s guarantee on all work
- Dust sheets down, tidy finish
Take a look at our full price list or bath cost comparison.
What happens on the day
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Get a quote
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
