Slough · England

Bath chip & crack repair in Datchet, Slough

Bath repair in and around Datchet: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chips caused by builders
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Datchet

Bath repair at your home in Datchet

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with hairline or through cracks in acrylic and a kit repair that didn’t last, we can help, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Area
Datchet (SL3)
Region
Slough
Warranty
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

How to care for the repair

Nothing complicated is needed:

  • Don’t leave razors or cans standing in the bath
  • Avoid scourers, wire wool and gritty cream cleaners
  • Protect the bath with a towel when doing jobs nearby
  • Give the bath a quick rinse after use

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Acrylic cracks with no access behind them
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Rust that has eaten right through a steel bath

Send us photos and we’ll tell you honestly before booking.

Materials we work on in Datchet

  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel

Should you replace it?

Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Datchet. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • A fixed quote before booking
  • Every repair guaranteed for a year
  • Colour mixed on the day to match
  • Honest advice, even when it means no job

Take a look at our prices page and bath cost comparison.

What your bath is made of matters

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Datchet: your questions answered

Is a bath repair durable?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Slough.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Will I be able to see the repair?

We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.

What happens after I send pictures?

We review the pictures and send a fixed quote and the next dates we have.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

About Datchet

Datchet is about 2 miles east of Windsor, in Slough. Across the SL3 area, we come to you. Datchet is one of 31 places in Slough we cover. Our jobs stretch from Datchet to London (21 miles away).

Our visits in SL3 are booked in the same way as anywhere else. Whether you live on High Street, London Road and Percy Place or a nearby road, we can come to you. If you are just outside Datchet, we cover Ditton (1 mile north-east), Myrke (1 mile north-west), Sunnymeads (1 mile south-east), Brands Hill (2 miles east) and Old Windsor (2 miles south). We also work in nearby towns such as Slough (3 miles north-west), Cippenham (3 miles north-west), Britwell (4 miles north-west), Burnham (5 miles north-west), Stoke Poges (4 miles north) and Huntercombe (4 miles north-west). Being one of Slough’s larger places, Datchet is somewhere we visit frequently.

Near you in Datchet

We visit homes around Churchmead School, St George's School and Church of St Mary, among other places. Also close by are The Royal Stag pub (under half a mile north-west), Home Park (0.8 miles west) and Datchet St Mary's CofE Primary School (under half a mile west). There is a railway station in Datchet itself: Datchet station. Further afield, we also cover the area around Windsor Castle (1.2 miles west) and Upton Hospital (1.7 miles north-west). Not far away are Staines Reservoirs.

  • Other local spots include Municipal Borough of Slough (2 miles north)
Map of Datchet © OpenStreetMap contributors

What affects the price in Datchet

Repairs from £95. We charge the same across the UK, including Datchet. The price reflects:

  • The type of damage
  • The material and finish
  • How many areas need work
  • Whether old repairs or coatings need taking off

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Send pictures for a quote

The better the pictures, the more accurate the price. Here’s what helps:

  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates
  • Any details about the material
  • A photo taken from further back

For a price in Datchet, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

The process

Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a morning or an afternoon, and you’re welcome to carry on with your day while we work.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, typically by the next day, the bath is ready to use.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Let us know if it has been repaired before
  • Keep a parking space free if you can

How to get a price

Most clients in Datchet get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Get a fixed price

Read more

What we’re called out for in Datchet

Rust generally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Clients normally contact us about:

  • An old repair that has yellowed or come loose
  • A hole punched through by something heavy
  • Damage done while the bathroom was being fitted
  • Scuffs and scratches in the surface

Questions to ask before booking

  • How the colour is matched
  • The length of the guarantee and what it covers
  • How the room is protected while they work
  • How long it needs to cure

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.