Cheshire West and Chester · England

Bath Repair in Davenham

Local bath repair for Davenham: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips under the taps
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Davenham

FAQs for Davenham

How invisible is a bath repair?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Do I need to be at home?

We need someone to let us in. You do not need to watch us work.

Can you repair several things at once?

Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Is a cracked acrylic bath repairable?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

How long before I can use the bath?

Generally the next day. We confirm the time before we leave.

How much does bath repair cost in Davenham?

Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.

What areas do you cover?

Across the UK, and that includes Davenham. Our prices are the same everywhere.

About our bath repair in Davenham

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our repair technicians work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and the jobs we see most are deep scratches in acrylic and chips under the taps.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Where
Davenham (CW9)
County
Cheshire West and Chester
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Repair or replace in Davenham?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • We will tell you if it’s not worth repairing
  • Dust sheets down, tidy finish
  • We come to you, anywhere in the UK

Read our full price list or resurfacing vs replacement cost guide.

When we’d advise against a repair

Some jobs are not right for a repair, for example:

  • Rust that has eaten right through a steel bath
  • Flexing caused by a failed cradle or loose feet
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send pictures and we will say what we think.

What we work on

  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Where we work around Davenham

Davenham is about 2 miles south of Northwich, in Cheshire West and Chester. Jobs in Davenham are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Davenham is one of 224 towns and villages in Cheshire West and Chester we cover. You can also see our page for Manchester, about 21 miles away.

Every address in CW9 is within our area. From London Road, Firth Fields and Mount Pleasant Road or anywhere nearby, a technician can come to you. Close by, we cover Kingsmead (1 mile north), Mere Heath (1 mile south-east), Moulton (1 mile south), Leftwich (1 mile north) and Hartford (1 mile north-west). Larger places within reach include Winsford (3 miles south), Frodsham (9 miles north-west), Hoole (15 miles west), Newtown (15 miles west), Over (4 miles south) and Wharton (3 miles south).

Local landmarks in Davenham

Typical jobs here are in homes near St Wilfrid's Church, Oddfellows Arms Public House and The County High School and the streets around them. Other local landmarks include Davenham CofE Primary School (under half a mile south-east) and Verdein Park (1.8 miles north). The closest station to Davenham is Greenbank station, about 1.4 miles north-west of the centre. Well-known places in the area include Victoria Infirmary (1.9 miles north). Not far away are Neumann's Flash and Marbury Reedbed Nature Reserve.

Map of Davenham © OpenStreetMap contributors

What we’re called out for in Davenham

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

Common reasons people in Davenham contact us include:

  • Chips along the edge of the bath
  • Scratches you can feel with a fingernail
  • A failed DIY repair that’s discoloured or lifting
  • Chips under the taps

What to look for in a quote

  • Aftercare advice
  • Whether they match the colour on site
  • What preparation is included
  • The length of the guarantee and what it covers

10 questions to ask before booking

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Don’t leave razors or cans standing in the bath
  • Have new chips seen to early
  • Put a towel in the bath if you’re working above it

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

How we price bath repair

Repairs from £95. You will not pay by the hour. The price is based on:

  • The size and number of damaged areas
  • How many items we do on one visit
  • Access to the area
  • What kind of damage it is

A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

How to get a fixed quote

A couple of clear pictures is all it takes. It helps if you send:

  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size
  • Any details about the material
  • Daylight if possible, and no flash reflection

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Materials and what they mean for the repair

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

What happens on the day

We work cleanly and quietly. Protection goes down first, then the work takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Let us know if it has been repaired before
  • Clear the area around the damage

How to get a price

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.