Cheshire West and Chester · England
Bath chip & crack repair in Moulton, Cheshire West and Chester
Bath repair for Moulton, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
Bath repair in Moulton, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you’re dealing with rusty patches near the plughole and a failed DIY repair that’s discoloured or lifting, we can help, whatever the material.
We stand behind the work with a one-year guarantee.
- Where
- Moulton (CW9)
- County
- Cheshire West and Chester
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Nothing complicated is needed:
- Don’t leave razors or cans standing in the bath
- Don’t scrub with anything abrasive
- Use a soft cloth and washing-up liquid for everyday cleaning
- Protect the bath with a towel when doing jobs nearby
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Towns and villages near Moulton
What else we do in Moulton
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Ask for a price
Upload photos of the damage and a wider shot of the entire item, and tell us you are in Moulton, and we will reply with a fixed price.
Advice
What affects the price in Moulton
Prices start from £95. We charge the same across the UK, including Moulton. The price reflects:
- Access to the area
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Unusual colours or finishes
We charge the same wherever you are, with no extra for Moulton. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- Any earlier repairs or coatings
- The material, if you know it
- A picture taken from further back
- Something in shot to show the size
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
What we are called out for in Moulton
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Signs it’s time to call us include:
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
- A chip where the taps sit
- Chips caused by builders
What to look for in a quote
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- Whether they match the colour on site
- When it can be used again
When a repair isn’t the answer
It helps to know what we can’t do too:
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Common questions in Moulton
How much does bath repair cost in Moulton?
Repairs from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What do you need from me?
Use the quote form or ring 0345 017 0787.
When can I have a bath again?
Normally within a day, depending on the repair.
Can you repair something that’s been repaired before?
Typically, yes. The old repair comes out first, so mention it when you send pictures.
Our work in Moulton
Moulton is about 2 miles north of Winsford, in Cheshire West and Chester. Anywhere in CW9, we carry out the work at your property. Moulton is one of 224 places in Cheshire West and Chester where we work. Our nearest city page is Manchester, about 21 miles away.
We work across CW9 and the streets around it. You’ll find streets such as Church Street, Regent Street and Whitlow Lane. We also travel to Mere Heath (1 mile north-east), Davenham (1 mile north), Meadowbank (1 mile south), Kingsmead (1 mile north) and Whitegate (2 miles west). Within a short drive, we also cover Northwich (3 miles north), Boughton (15 miles west), Frodsham (10 miles north-west), Hoole (14 miles west), Newtown (15 miles west) and Over (3 miles south).
Landmarks near Moulton
Our clients here include homes close to St Stephen's Church, The County High School and Oddfellows Arms Public House. The closest station to Moulton is Hartford station, roughly 2.1 miles north-west. A little further out are Victoria Infirmary (2.7 miles north). The countryside around Moulton includes Marbury Reedbed Nature Reserve and Neumann's Flash.
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Work done at your home or business
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- One-year guarantee on every repair
Read our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
