Wiltshire · England
Bath chip & crack repair in Dean, Wiltshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Dean, with a one-year guarantee on every repair.
- Repairs from £95
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
What a repair can’t fix
A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Bath repair in Dean without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Our repair technicians work on whirlpool & spa baths, acrylic and pressed steel enamel, and people most frequently call us about a chipped rim or side and a cracked acrylic bath.
All our work is covered by a one-year guarantee.
- Location
- Dean (SP5)
- Area hub
- Wiltshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Dean
Dean is about 8 miles north-east of Blandford Forum, in Wiltshire. Our technicians come to homes and businesses in Dean and the surrounding area, so there is no workshop to go to. Dean is one of 425 towns and villages in Wiltshire where we work.
Here we cover the SP5 postcode area. Other places close to Dean include Woodcutts (1 mile north-west), Deanend (1 mile north), Sixpenny Handley (2 miles north-east), Deanland (2 miles north-east) and Tollard Royal (2 miles north-west). Larger places within reach include Salisbury (14 miles north-east), Bugmore (13 miles north-east), Milford (14 miles north-east), Old Sarum (15 miles north-east), Harnham (13 miles north-east) and Bemerton (13 miles north-east).
Local landmarks in Dean
Around Dean, we work in homes near Church of St Andrew. A little further out are Pitt Rivers Museum (Farnham) (1.3 miles west). Open spaces near Dean include Western Downs.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Check that an acrylic bath does not move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not leave a fresh chip for long
- Keep metal cans and razors off the surface
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Repair or replace in Dean?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- We leave the room as we found it
- Everything repaired in place
- Same prices wherever you are
- Colour-matched on site
See our pricing and resurfacing vs replacement cost guide.
How we price bath repair
Repairs from £95. We give every job a fixed price from pictures. This is what makes a difference:
- The type of damage
- Doing more than one item at once
- Access to the area
- The material
The price reflects the work involved, not your postcode. You will see the full price before you book, with no extras added later.
How to get a fixed price
Two or three clear pictures are usually enough. Try to include:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- One picture of the entire bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Signs you need bath repair in Dean
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
People usually call us after spotting one of these:
- A cracked acrylic bath
- Scuffs and scratches in the surface
- Rust spots around the plughole
- Damage beneath the taps
Before booking anyone
- If travel is included in the price
- Who will actually do the work
- Whether cleaning and preparation are in the price
- What the guarantee covers, and for how long
Dean: your questions answered
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
Can a cracked acrylic bath be fixed?
Usually, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Nearby places to Dean
Also in Dean
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
