Wiltshire · England
Bath Repair for Old Sarum homes
We travel to Old Sarum for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Snagging damage from a refit
- A chip where the taps sit
Landlord and trade work in Old Sarum
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Old Sarum use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our bath repair in Old Sarum
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. We work on acrylic, whirlpool & spa baths and pressed steel enamel, and common reasons people get in touch are rust by the waste and overflow and a kit repair that didn’t last.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Where
- Old Sarum (SP4)
- Area hub
- Wiltshire
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Old Sarum
Other services in Old Sarum
Common problems we fix in Old Sarum
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- Damage beneath the taps
What your quote should include
- How to look after the finish
- What the guarantee covers, and for how long
- If travel is included in the price
- What happens if the damage is worse than the pictures show
How we price bath repair
Prices start from £95. You’ll know the full cost before you book. We take into account:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A photo taken from further back
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
How to look after the repair
So the finish stays in good condition for years:
- Do not scrub with anything abrasive
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Old Sarum questions
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Old Sarum and nearby
Old Sarum is about 2 miles north of Salisbury, in Wiltshire. Customers in Old Sarum get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We cover all 425 towns and villages in Wiltshire, from the larger towns to small villages. Our nearest city page is London, about 78 miles away.
Postcode districts we cover here: SP4. Jobs here include addresses on Beauchamp Proctor Rise, Mannock Field and Barker Close. Other places close to Old Sarum include Winterbourne Earls (1 mile east), Winterbourne Dauntsey (2 miles east), Winterbourne Gunner (2 miles north-east), Gomeldon (3 miles east) and Porton (3 miles north-east). Larger places within reach include Amesbury (4 miles north), Bugmore (3 miles south), Milford (3 miles south), Harnham (3 miles south), Bulford (6 miles north) and Bemerton (3 miles south-west).
Local landmarks in Old Sarum
Locally, our jobs take us to homes close to Old Sarum Primary School and St Joseph's Catholic School. For rail, the closest station is Salisbury station, about 2.5 miles south of the centre. Further afield, we also cover the area around Harvard Hospital (3.6 miles south) and Old Sarum Castle (1.1 miles south-west). Not far away are Harnham Hill.
- Other local spots include Salisbury (2.7 miles south)
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a morning or an afternoon, tidy-up included.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Read more
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
