Kent · England
Bath chip & crack repair in Deerton Street, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Deerton Street. Send pictures for a free, fixed quote.
- Repairs from £95
- A kit repair that didn’t last
- A chipped rim or side
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Deerton Street
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Bath repair in Deerton Street, done in place
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. Our repair technicians work on roll-top & freestanding, acrylic and cast iron enamel, and common reasons people get in touch are a chip where the taps sit and deep scratches in acrylic.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Deerton Street (ME9)
- Region
- Kent
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Deerton Street
If you manage property in Deerton Street, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.
Landlords, letting agents and housing providers in Deerton Street use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Have new chips seen to early
- Give the bath a quick rinse after use
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Where we work around Deerton Street
Deerton Street is about 3 miles west of Faversham, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Deerton Street is one of 922 places in Kent where we work. Our nearest city page is London, about 41 miles away.
Postcode districts we cover here: ME9. We regularly work on streets such as Deerton Street and Lower Road. Nearby, we also work in Norton Ash (1 mile south), Teynham Street (1 mile north), Lewson Street (1 mile south-west), Teynham (1 mile west) and Four Oaks (1 mile south-east). Larger places within reach include Maidstone (14 miles west), Ashford (13 miles south), Canterbury (11 miles east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (3 miles east).
Landmarks near Deerton Street
Locally, our jobs take us to homes close to Teynham Parochial Church of England Primary School and Church of St Mary and the streets around them. Deerton Street’s nearest station is Teynham station, roughly 1 mile west. Well-known places in the area include Newnham Castle (3.3 miles south) and Sittingbourne Heritage Museum (3.8 miles west).
What we’re called out for in Deerton Street
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Common reasons people in Deerton Street contact us include:
- Snagging damage from a refit
- Scratches you can feel with a fingernail
- Rusty patches near the plughole
- A cracked acrylic bath
Before booking anyone
- How the room is protected while they work
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- Is the price fixed, and does it include VAT?
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we take into account:
- Access to the area
- The size and number of damaged areas
- How many items we do on one visit
- Whether old repairs or coatings need taking off
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Your postcode, so we can check dates
- A clear, close picture of the problem area
Send us pictures of the damage and one of the whole item, with your ME9 postcode, and we’ll reply with a fixed quote.
Places near Deerton Street
What else we do in Deerton Street
Your questions about bath repair in Deerton Street
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can you repair a hole in a bath?
Normally. Photos of the hole and the underside help us check.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
When can I have a bath again?
Most baths can be used the day after. We’ll tell you the exact curing time when we finish.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Before we arrive
- Let us know which floor the room is on
- Let us know about parking or access
- Let the surface dry out before the visit
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
