Cumbria · England

Bath chip & crack repair in Dendron, Cumbria

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Dendron, with a one-year guarantee on every repair.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Dendron

When we’d advise against a repair

In fairness, there are a few things a repair won’t fix:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Wear across the entire surface, which needs re-enamelling
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send photos and we’ll say what we think.

What we work on

  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding

About our bath repair in Dendron

You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site. Whether it’s a failed DIY repair that’s discoloured or lifting and cracks in an acrylic bath, we can typically put it right, whatever the material.

You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Location
Dendron (LA12)
County
Cumbria
Cover
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Covering Dendron

Dendron is about 3 miles east of Barrow-in-Furness, in Cumbria. Our technicians come to clients in Dendron and nearby villages, so you do not need to take anything anywhere. We cover 438 places in Cumbria. We work right across the region, from Dendron to Liverpool (51 miles away).

We work across LA12. If you are just outside Dendron, we cover Gleaston (1 mile east), Leece (1 mile south), Stank (1 mile west), Downfield (1 mile south) and Stainton with Adgarley (1 mile north). Further out, we also cover Barrow-in-Furness (3 miles west), Ulverston (5 miles north-east), Hindpool (3 miles west), Salthouse (3 miles south-west), Vickerstown (4 miles west) and Millom (7 miles north-west).

Landmarks near Dendron

We visit homes around Church of St Matthew, Newton Primary School and Barrow-in-Furness Sixth Form College and the streets around them. The closest station to Dendron is Roose station, about 1.8 miles south-west. A little further out are Furness Abbey Museum (2 miles north-west) and Furness General Hospital (2.3 miles west). For a walk, there is Urswick Tarn and Birkrigg Common.

Map of Dendron © OpenStreetMap contributors

When to call us in Dendron

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.

The most common problems we are called about are:

  • Snagging damage from a refit
  • A hole punched through by something heavy
  • Chips along the edge of the bath
  • Cracks in an acrylic bath

Before you book anyone

  • Whether the price is fixed and includes VAT
  • When it can be used again
  • How the room is protected while they work
  • Whether a trained technician does the job

Choosing a repair company

For landlords and businesses

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Dendron, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

What bath repair costs

Repairs from £95. We do not charge extra for travel to Dendron. The price comes down to:

  • Doing more than one item at once
  • What the surface is made of
  • Where the damage is and how we get to it
  • The colour and finish to match

Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send pictures for a quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Whether it’s been repaired or coated before
  • Any details about the material
  • A photo taken from further back
  • One sharp close-up of the damage

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

The process

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, typically the following day.

How to prepare

  • Let us know if it has been repaired before
  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area

Get a quote

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Send photos for a quote

Read more

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Aftercare tips

So the finish stays in good condition for years:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Rinse the bath after use, especially in hard water areas
  • Have new chips seen to early
  • A dripping tap stains enamel, so fix it early

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.

Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.

Common questions in Dendron

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Can you repair several things at once?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.

What areas do you cover?

Across the UK, and that includes Dendron. Our prices are the same everywhere.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you repair a hole in a bath?

In most cases. Photos of the hole and the underside help us check.

When can I have a bath again?

Normally by the following day, though it depends on what we’ve done.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.