Suffolk · England
Bath chip & crack repair in Dennington, Suffolk
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Dennington, with a one-year guarantee on every repair.
- Repairs from £95
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
About our bath repair in Dennington
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. We regularly repair roll-top & freestanding, pressed steel enamel and cast iron enamel, and common reasons people get in touch are chips on the rim or sides and rust by the waste and overflow.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Dennington (IP13)
- Region
- Suffolk
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath repair costs
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- How much damage there is
- Previous DIY repairs that have to come out
- The material
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
Two or three clear pictures are usually enough. It helps if you send:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- The material, if you know it
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
Why Dennington clients choose us
- We come to you, anywhere in the UK
- Rooms protected and left tidy
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
See our prices page or guide to resurfacing and replacement costs.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
What we’re called out for in Dennington
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
The things customers usually mention when they call include:
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- Damage beneath the taps
- An old repair that has yellowed or come loose
What to look for in a quote
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
- How changes to the job are handled
- Who will actually do the work
Dennington questions
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What does bath repair cost?
Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your IP13 postcode.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Looking after it afterwards
So the finish stays in good condition for years:
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Places near Dennington
More services for Dennington
Landlord and trade work in Dennington
We work for landlords, letting agents and housing providers in Dennington as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
The process
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes a few hours, and we will keep you posted as we go.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the following day.
Preparing for the visit
- Ensure the area is dry
- Keep children and pets away from the room on the day
- Open a window if you can
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
Our work in Dennington
Dennington is about 14 miles north of Kesgrave, in Suffolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 731 towns and villages in Suffolk. You can also see our page for London, about 80 miles away.
All of IP13 is within our area, from the main roads to the quietest streets. Whether you live on The Street, Swainston Way and Saxtead Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Maypole Green (1 mile west), Capon's Green (1 mile east), Saxtead Bottom (1 mile south-west), Brabling Green (2 miles south-east) and Badingham (2 miles east). Within a short drive, we also cover Stowmarket (15 miles west), Kesgrave (14 miles south), Woodbridge (11 miles south), Diss (13 miles north-west), Needham Market (14 miles south-west) and Bungay (14 miles north).
What’s near Dennington
Typical jobs here are in homes near St Mary's Church, Thomas Mills High School and Dennington Church of England Primary School and the streets around them. Further afield, we also cover the area around Framlingham Castle (2 miles south) and Lanman Museum (2 miles south). Open spaces near Dennington include Framlingham Mere.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
