Somerset · England

Bath Repair in Ditcheat

Bath repair across Ditcheat and nearby, done in a single visit in most cases.

  • Repairs from £95
  • Impact holes in acrylic
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Ditcheat

Can I fix it myself?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Bath repair in Ditcheat without replacing anything

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with impact holes in acrylic and a kit repair that didn’t last, we can help.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Ditcheat (BA4)
Region
Somerset
Cover
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

What your bath is made of matters

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

Ditcheat and the surrounding area

Ditcheat is about 8 miles south-east of Wells, in Somerset. Whether you’re in the middle of Ditcheat or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Ditcheat is one of 640 places in Somerset where we work.

Here we cover the BA4 postcode area. That includes homes on Lintern Close, Kite Lane and Smith's Lane and the roads around them. Nearby, we also work in Alhampton (1 mile south), Wraxall (1 mile west), Kilkenny (2 miles west), Pylle (2 miles north-west) and Huxham Green (2 miles west). Further out, we also cover Yeovil (13 miles south), Frome (12 miles north-east), Wells (8 miles north-west), Midsomer Norton (11 miles north), Shepton Mallet (4 miles north) and Street (9 miles west).

What’s near Ditcheat

We visit homes around Church of St Mary Magdalene, Ansford Academy and Ditcheat Primary School. The nearest railway station is Castle Cary station, roughly 1.7 miles south. The countryside around Ditcheat includes Lamyatt Beacon.

Map of Ditcheat © OpenStreetMap contributors

Your questions about bath repair in Ditcheat

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Will I be able to see the repair?

We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.

Can you repair a hole in a bath?

Typically. Photos of the hole and the underside help us check.

How do I book?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Do you come to Ditcheat?

Yes. We work across the UK and come to Ditcheat and the rest of Somerset. Send us pictures for a fixed quote, or call 0345 017 0787.

What does bath repair cost?

Repairs from £95. We give a fixed quote from your photos. Send a close-up and a photo of the whole item with your BA4 postcode.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Repairing versus replacing in Ditcheat

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

What you get with us

  • Free fixed quotes from pictures
  • We come to you, anywhere in the UK
  • Every repair guaranteed for a year
  • Straight answers about what a repair can do

Take a look at our pricing or bath cost comparison.

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Metal that has corroded all the way through
  • Flexing caused by a failed cradle or loose feet
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send pictures and we will say what we think.

Materials we work on in Ditcheat

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel

Common problems we fix in Ditcheat

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.

You may need us if you’ve spotted:

  • Chips caused by builders
  • Cracks in an acrylic bath
  • A hole punched through by something heavy
  • Rust by the waste and overflow

Comparing quotes

  • A fixed quote, and whether VAT is included
  • How soon you can use it again
  • What happens if they find more damage
  • Whether the price covers travel

10 questions to ask before booking

How to look after the repair

Simple care helps the repair last. Our advice:

  • Ensure an acrylic bath is firm underfoot
  • Rinse the bath after use, especially in hard water areas
  • Store metal items away from the bath
  • Fix dripping taps early to stop staining and limescale

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

Work for landlords and builders

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

The process

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a few hours, depending on the damage in most cases. The room is left tidy and you will know when it can be used.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, usually by the following day, the bath is ready to use.

Preparing for the visit

  • Ensure the area is dry
  • Clear the area around the damage
  • Mention any earlier repairs or resurfacing

Ask for a price

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Send photos for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.