Hampshire · England
Bath chip & crack repair in Dogmersfield, Hampshire
We travel to Dogmersfield for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A chip where the taps sit
- Hairline or through cracks in acrylic
About our bath repair in Dogmersfield
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Typical jobs include rust spots around the plughole and chips along the edge of the bath, across cast iron enamel, whirlpool & spa baths and pressed steel enamel.
Every job is backed for twelve months in Dogmersfield and everywhere else. We return to put right any problem with the work.
- Area
- Dogmersfield (RG27)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
If you manage property in Dogmersfield, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Common questions in Dogmersfield
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Something went through my bath. Can it be fixed?
Typically. Send us a photo of the hole and one from under the bath if you can.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Dogmersfield customers choose us
- Rooms protected and left tidy
- No extra charge for your area
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
Take a look at our prices page and guide to resurfacing and replacement costs.
Nearby places to Dogmersfield
What else we do in Dogmersfield
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- Wear across the entire surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
If in doubt, send photos and we will say what we think.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Common problems we fix in Dogmersfield
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Keep an eye out for any of the following:
- Chips under the taps
- Snagging damage from a refit
- A kit repair that didn’t last
- Rusty patches near the plughole
What your quote should include
- Aftercare advice
- Whether they match the colour on site
- What happens if they find more damage
- When it can be used again
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Covering Dogmersfield
Dogmersfield is about 2 miles west of Fleet, in Hampshire. Whether you’re in the middle of Dogmersfield or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Dogmersfield is one of 683 towns and villages in Hampshire we cover. You can also see our page for London, about 37 miles away.
Here we cover the RG27 postcode area. Neighbouring places we cover include Crookham Village (1 mile east), Winchfield Hurst (1 mile north-west), Mill Lane (1 mile south), Fleet (2 miles east) and Bowling Alley (2 miles south). Larger places within reach include Basingstoke (10 miles west), Farnborough (5 miles east), Aldershot (5 miles east), Alton (9 miles south-west), Yateley (5 miles north) and Tadley (13 miles north-west).
Landmarks near Dogmersfield
In Dogmersfield, that means homes near Calthorpe Park School, The Exchequer pub and All Saints' Church, among other places. Also close by are Calthorpe Park (1.3 miles north-east) and Dogmersfield Church of England Primary School (less than half a mile north). For rail, the closest station is Winchfield station, about 1.7 miles north-west of the centre. Other landmarks nearby include Hart Shopping Centre (1.8 miles north-east) and Fleet Community Hospital (1.8 miles north-east). Not far away are Tundry Hill and Fleet Pond Nature Reserve.
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- Unusual colours or finishes
- What kind of damage it is
- How much damage there is
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- Where you are, by postcode
- One sharp close-up of the damage
- Details of any past repairs
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. It normally takes a morning or an afternoon, and we will keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
