Lancashire · England

Bath chip & crack repair in Downholland Cross, Lancashire

We travel to Downholland Cross for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • A hole punched through by something heavy
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Downholland Cross

Bath repair in Downholland Cross without replacing anything

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We regularly repair whirlpool & spa baths, pressed steel enamel and acrylic, and the jobs we see most are impact holes in acrylic and an old repair that has yellowed or come loose.

You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Downholland Cross (L39)
Region
Lancashire
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

What happens on the day

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a morning or an afternoon in most cases. The room is left tidy and ready to use once it has cured.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the next day.

How to prepare

  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day
  • Mention any parking restrictions or tricky access

Getting a price

If you’re in Downholland Cross and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Send pictures for a quote

Related advice

What affects the price in Downholland Cross

Prices start from £95. We charge the same across the UK, including Downholland Cross. What changes the price is:

  • The type of damage
  • How much damage there is
  • The material
  • Whether old repairs or coatings need taking off

We charge the same wherever you are, with no extra for Downholland Cross. The job itself decides the price: how much damage, what it’s made of and how many items.

How to get a fixed quote

A couple of clear pictures is all it takes. Try to include:

  • What it’s made of, if you know
  • One picture of the entire bath
  • Whether it’s been repaired or coated before
  • Something in shot to show the size

To get a price, send a couple of pictures through our quote form or call us. We’ll say immediately whether it can be repaired.

Repair or replace: which is better?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why us?

  • Generally one visit, start to finish
  • A fixed quote before you book
  • Colour-matched on site
  • Every repair guaranteed for a year

See our full price list or resurfacing vs replacement cost guide.

What a repair cannot fix

In fairness, there are a few things a repair won’t fix:

  • Leaking fittings, which need a plumber
  • Rust that has eaten right through a steel bath
  • Wear across the entire surface, which needs re-enamelling

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Common problems we fix in Downholland Cross

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.

Keep an eye out for these signs:

  • Deep scratches in acrylic
  • An old repair that has yellowed or come loose
  • Damage done while the bathroom was being fitted
  • A cracked acrylic bath

Comparing quotes

  • If travel is included in the price
  • Whether the colour is mixed to match
  • How your room will be protected
  • What preparation is included

10 questions to ask before booking

Looking after it afterwards

So the finish stays in good condition for years:

  • If an acrylic bath flexes, have its feet adjusted
  • Get any new chip repaired before it rusts
  • Get a dripping tap fixed promptly
  • Rinse it down after each bath

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.

Where we work around Downholland Cross

Downholland Cross is about 3 miles west of Ormskirk, in Lancashire. Across the L39 area, a technician comes to you. We cover 482 places across Lancashire. You can also see our page for Liverpool, about 10 miles away.

Postcode districts we cover here: L39. We also cover the places around Downholland Cross: Haskayne (1 mile north-west), Bangor's Green (2 miles north-east), Barton (2 miles north-west), Halsall (2 miles north) and Aughton (2 miles south-east). We also work in nearby towns such as Chorley (15 miles north-east), Lytham St Anne's (14 miles north), Leyland (14 miles north-east), Skelmersdale (7 miles east), Ormskirk (3 miles east) and St Annes (14 miles north).

Around Downholland Cross

Typical jobs here are in homes near St Thomas' Church. The closest station to Downholland Cross is Town Green station, about 2.3 miles south-east. Nearby you will also find Ormskirk and District General Hospital (3.5 miles east).

Map of Downholland Cross © OpenStreetMap contributors

Common questions in Downholland Cross

How invisible is a bath repair?

On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Are there extra charges for Downholland Cross?

We don’t add a call-out fee. Your fixed quote includes everything.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

Is a bath repair durable?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.