Lancashire · England

Bath chip & crack repair in St Annes, Lancashire

Bath repair for St Annes, without a refit. Send us photos for a fixed quote, then book a visit.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for St Annes homes

Bath repair at your home in St Annes

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. You can typically use the bath the day after. Common call-outs are for scratches you can feel with a fingernail and snagging damage from a refit, on pressed steel enamel, cast iron enamel and whirlpool & spa baths.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Location
St Annes (FY8)
Region
Lancashire
Cover
One year on every repair
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

What we are called out for in St Annes

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.

Clients typically contact us about:

  • Damage done while the bathroom was being fitted
  • Hairline or through cracks in acrylic
  • Holes from dropped items
  • Chips along the edge of the bath

Comparing quotes

  • Aftercare advice
  • Who turns up on the day
  • Whether there are any call-out or travel charges
  • Is the price fixed, and does it include VAT?

How to compare quotes

How the visit works

Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and we start. You can expect it to take a few hours, and we’ll tell you if anything changes.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Mention any earlier repairs or resurfacing
  • Open a window if you can

How to get a price

Email us photos of the damage and one of the entire item, and tell us you’re in St Annes, and we’ll reply with a fixed price.

Get a fixed price

Advice

How we price bath repair

Prices start from £95. There are no hourly rates or hidden extras. The price depends on:

  • How much damage there is
  • The type of damage
  • The material
  • The colour and finish to match

We charge the same wherever you are, with no extra for St Annes. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed quote

When you take your photos, a few simple things make all the difference:

  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale
  • The material, if you know it
  • Any earlier repairs or coatings

The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.

Where we work around St Annes

St Annes is about 1 mile west of Lytham St Anne's, in Lancashire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. St Annes is one of 482 places in Lancashire we cover. Our jobs stretch from St Annes to Liverpool (about 24 miles away).

Here we cover the FY8 postcode area. You’ll find streets such as Hove Road, York Road and Park Road, and we cover them all. If you’re just outside St Annes, we cover Lytham St Anne's (1 mile east), Fairhaven (2 miles south-east), Starr Gate (2 miles north-west), Squires Gate (2 miles north) and South Shore (3 miles north). We also work in nearby towns such as Preston (14 miles east), Bamber Bridge (15 miles east), Leyland (14 miles east), Fulwood (13 miles east), Fleetwood (11 miles north) and Ormskirk (14 miles south-east).

Landmarks near St Annes

Around St Annes, we work in homes near Our Lady Star of the Sea Catholic Primary School, King Edward VII and Queen Mary School and The Trawl Boat Inn, among other places. Nearby too are Arnold KEQMS (1.1 miles south-east) and St Thomas' Church (less than half a mile south-east). St Annes has its own railway station: St Annes-On-The-Sea station. Nearby you’ll also find Hanger 42 Spitfire Visitor Centre (1.8 miles north) and Clifton Hospital (1.1 miles south-east). For a walk, there’s Marton Mere.

Map of St Annes © OpenStreetMap contributors

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Aftercare tips

It’s all simple stuff:

  • Check that an acrylic bath does not move when you stand in it
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Store metal items away from the bath
  • A dripping tap stains enamel, so fix it early

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Your questions about bath repair in St Annes

Which areas do you work in?

The whole UK, including all of Lancashire. Just include your postcode and we will confirm dates.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

How long does the repair take to cure?

Normally within a day, depending on the repair.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we will do the rest.

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

What a repair cannot fix

Some jobs are not right for a repair, for example:

  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we cannot reach from underneath
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send photos and we will say what we think.

Materials we work on in St Annes

  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel

Repair or replace: which is better?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in St Annes

  • A fixed quote before booking
  • Everything repaired in place
  • Work done at your home or business
  • No extra charge for your area

Read our pricing or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.