Oxfordshire · England
Bath chip & crack repair in Draycott, Oxfordshire
Bath repair in Draycott without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
How we handle bath repair in Draycott
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We work on cast iron enamel, acrylic and roll-top & freestanding, and common reasons people get in touch are a hole punched through by something heavy and snagging damage from a refit.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Draycott (OX9)
- County
- Oxfordshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Draycott
Draycott is about 4 miles west of Thame, in Oxfordshire. Across the OX9 area, a technician comes to you. Draycott is one of 443 places in Oxfordshire we cover. You can also see our page for London, about 45 miles away.
Here we cover the OX9 postcode area. We also travel to Tiddington (1 mile south), Albury (1 mile south-east), Little Ickford (1 mile north-east), Ickford (1 mile north) and Shabbington (1 mile north-east). Further out, we also cover Oxford (7 miles west), Didcot (12 miles south-west), Bicester (11 miles north), Abingdon-on-Thames (11 miles south-west), Thame (4 miles east) and Kidlington (11 miles north-west).
What’s near Draycott
Typical jobs here are in homes near Ickford School, Church of St Helen and The Fox Inn and the streets around them. Other landmarks nearby include Thame Community Hospital (4 miles east) and Waterperry Gardens Rural Museum (1.2 miles west). For a walk, there’s Wells Farm.
Nearby places to Draycott
Other services in Draycott
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
- Keep abrasive pads and gritty cleaners away from the bath
- Check that an acrylic bath doesn’t move when you stand in it
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
What affects the price in Draycott
Repairs from £95. There is no area surcharge for Draycott. What changes the price is:
- The type of damage
- How much damage there is
- The material
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A coin beside the damage so we can judge size
For a price in Draycott, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Draycott
- A year’s guarantee on all work
- One visit for most repairs
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
Read our pricing and guide to resurfacing and replacement costs.
How the visit works
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It generally takes two to three hours for most chips, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Point us to the nearest place to park
- Make sure the area is dry
- Keep children and pets away from the room on the day
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
Draycott: your questions answered
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote and the next dates we have.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Signs you need bath repair in Draycott
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex.
Keep an eye out for these signs:
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
- Chips on the rim or sides
What to look for in a quote
- How long the guarantee is and what it covers
- How changes to the job are handled
- Aftercare advice
- How the colour is matched
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
