Herefordshire · England
Bath Repair for Eardisley homes
Bath repair in and around Eardisley: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips on the rim or sides
Aftercare tips
Once the work has cured, treat it gently:
- Get any new chip repaired before it rusts
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse it down after each bath
- Clean with warm water and a mild detergent
A repaired bath needs no special treatment. Skip bleach and gritty creams.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Bath repair in Eardisley, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Typical jobs include rust by the waste and overflow and impact holes in acrylic, on roll-top & freestanding, cast iron enamel and acrylic.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Eardisley (HR3)
- Area hub
- Herefordshire
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Eardisley
Eardisley is about 14 miles north-west of Hereford, in Herefordshire. Anywhere in HR3, we carry out the work at your property. Eardisley is one of 255 towns and villages in Herefordshire we cover. Our jobs stretch from Eardisley to Birmingham (about 52 miles away).
All of HR3 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Church Road, Eastfield and Almeley Road. We also cover the places around Eardisley: Lower Welson (1 mile west), Dukes (1 mile north-west), Winforton (2 miles south-west), Millhalf (2 miles south-west) and Whitney-on-Wye (3 miles south-west). We also work in nearby towns such as Hereford (14 miles south-east), Leominster (13 miles north-east), Redhill (14 miles south-east), Newton Farm (13 miles south-east), Whitecross (13 miles south-east) and Eign Hill (14 miles south-east).
Landmarks near Eardisley
Around Eardisley, we work in homes near Church of St Mary Magdalene, New Strand pub and Eardisley CofE Primary School, among other places. Further afield, we also cover the area around Eardisley Castle (within half a mile south). Not far away are Birches Farm and Merbach Hill.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs in Herefordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Signs you need bath repair in Eardisley
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
You may need us if you’ve spotted:
- Impact holes in acrylic
- Chips on the rim or sides
- Rusty patches near the plughole
- Deep scratches in acrylic
Questions to ask before you book
- How long it needs to cure
- How long the guarantee is and what it covers
- Who turns up on the day
- What prep work is covered
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Point us to the nearest place to park
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Read more
Eardisley: your questions answered
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Something went through my bath. Can it be fixed?
Generally. Send us a photo of the hole and one from under the bath if you can.
Will the repair show?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Repair or replace in Eardisley?
Swapping a damaged bath for a new one generally means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- Nothing taken out or refitted
Read our pricing or bath cost comparison.
Towns and villages near Eardisley
What else we do in Eardisley
Honest limits
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Eardisley
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- Whether we combine several jobs
- The material and finish
- Whether old repairs or coatings need taking off
- Access to the area
The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
Quotes from your photos
We price nearly every job from pictures. This is what we need:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Where you are, by postcode
For a price in Eardisley, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
