Herefordshire · England
Bath Repair in Winforton
Local bath repair for Winforton: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A chip where the taps sit
- Scuffs and scratches in the surface
Bath repair in Winforton, done in place
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Common call-outs are for a chip where the taps sit and a kit repair that didn’t last, across acrylic, pressed steel enamel and cast iron enamel.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Winforton (HR3)
- County
- Herefordshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Winforton
Winforton is about 14 miles west of Hereford, in Herefordshire. Anywhere in HR3, we come to you. We cover 255 places in Herefordshire. Our jobs stretch from Winforton to Birmingham (54 miles away).
We cover every part of HR3. From Winforton Common Road and Ramblers Way or a nearby road, we can come to you. Nearby, we also work in Millhalf (1 mile west), Eardisley (2 miles north-east), Lower Welson (2 miles north), Whitney-on-Wye (2 miles west) and Dukes (2 miles north). Larger places within reach include Hereford (14 miles east), Leominster (14 miles north-east), Redhill (14 miles south-east), Newton Farm (14 miles south-east), Whitecross (13 miles east) and Eign Hill (15 miles east).
Around Winforton
Around Winforton, we work in homes near Church of St. Michael and All Angels and The Sun Inn. Other landmarks nearby include Eardisley Castle (1.4 miles north-east). The countryside around Winforton includes Merbach Hill and Birches Farm.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Towns and villages near Winforton
Other services in Winforton
Landlord and trade work in Winforton
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
FAQs for Winforton
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
What happens next?
We come back with a fixed price, generally with dates to choose from. You’re under no obligation.
What does bath repair cost?
Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your HR3 postcode.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We clean up when we are done and let you know when you can use it again.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
How to care for the repair
To keep it looking its best for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Prices and what affects them
Repairs from £95. We charge the same across the UK, including Winforton. The price reflects:
- How much damage there is
- The colour and finish to match
- Whether we combine several jobs
- What the surface is made of
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed price
Before you send pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- What it’s made of, if you know
- A clear, close picture of the problem area
Most clients in Winforton get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Do you need bath repair in Winforton?
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
These are the problems we’re asked about most:
- Deep scratches in acrylic
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
- Chips under the taps
Questions to ask before you book
- When it can be used again
- Who will actually do the work
- How to care for the finish
- If travel is included in the price
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- Rust that has eaten right through a steel bath
- Cracks in acrylic we cannot reach from underneath
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Winforton
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
