Salford · England

Bath chip & crack repair in Eccles, Salford

Bath repair for Eccles, without a refit. Get a fixed quote from your pictures, then we come to you.

  • Repairs from £95
  • Impact holes in acrylic
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Eccles homes

What we can’t put right

To be straight with you, some problems need a different fix:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath worn all over, where resurfacing makes more sense
  • Rust that has eaten right through a steel bath

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we work on in Eccles

  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

Bath repair in Eccles without replacing anything

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and common reasons people contact us are hairline or through cracks in acrylic and chips along the edge of the bath.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Location
Eccles (M30, M6)
Area hub
Salford
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

How we price bath repair

Repairs from £95. We price every job individually, from your photos. What matters most is:

  • The material and finish
  • Unusual colours or finishes
  • How many items we do on one visit
  • The size and number of damaged areas

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.

How to get a fixed price

Before you send photos, a few simple things make all the difference:

  • Natural light rather than flash
  • What it’s made of, if you know
  • The postcode, so we can plan the visit
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Common problems we fix in Eccles

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.

The things customers usually mention when they call are:

  • Rust by the waste and overflow
  • Cracks in an acrylic bath
  • A chipped rim or side
  • Damage beneath the taps

Questions to ask before booking

  • What happens if the damage is worse than the pictures show
  • How soon you can use it again
  • How the room is protected while they work
  • Whether a trained technician does the job

How to compare quotes

How to look after the repair

Once the work has cured, treat it gently:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Clean with warm water and a mild detergent
  • Protect the bath with a towel when doing jobs nearby
  • Get a dripping tap fixed promptly

Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

About Eccles

Eccles is about 3 miles west of Salford, in Salford. We visit customers in Eccles and the surrounding area, so you don’t need to take anything anywhere. Eccles is one of 21 towns and villages in Salford where we work. Our jobs stretch from Eccles to Manchester (about 6 miles away).

Jobs in M30 and M6 are booked in the same way as anywhere else. Whether you live on Station Road, Nelson Street and Police Street or a nearby road, we can come to you. With the A57 and A576 close by, Eccles is easy for our repair technicians to reach. Nearby, we also work in Patricroft (1 mile south-east), Winton (1 mile west), Monton (1 mile north-east), Barton upon Irwell (1 mile south) and Dumplington (1 mile south). Further out, we also cover Salford (3 miles east), Little Hulton (4 miles north-west), Irlam (4 miles south-west), Walkden (3 miles north-west), Cadishead (5 miles south-west) and Worsley (3 miles north-west).

Local landmarks in Eccles

Around Eccles, we work in homes near Christ Church CofE Primary School, St Patrick's RC High School and Arts College and Buile Hill Park. Nearby too are Eccles College (1.1 miles north-east), Christ Church Patricroft (within half a mile south) and The Bridgewater pub (within half a mile south). There is a railway station in Eccles itself: Patricroft station. Other landmarks nearby include Manchester Castle (4.7 miles east) and Monks Hall (0.7 miles east). For a walk, there’s Cadishead and Little Woolden Moss and Unicorn Grocery.

  • Other local spots include Municipal Borough of Stretford (3 miles south-east)
Map of Eccles © OpenStreetMap contributors

What we do, step by step

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Clear toiletries, mats and anything else from around the area
  • Ensure the area is dry

Getting a price

If you’re in Eccles and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Advice

Eccles questions

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

What do you need from me?

A close-up, a wider photo and your postcode. Then we will agree a date.

What happens once I’ve sent pictures?

You will get a fixed quote back, plus dates. You are under no obligation.

Can a cracked acrylic bath be fixed?

Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.

Will I be able to see the repair?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Do you cover the whole of Salford?

The entire UK, including all of Salford. Send your postcode with your photos and we’ll offer you dates.

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.