Gloucestershire · England
Bath Repair in Edge End
Bath repair in and around Edge End: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips on the rim or sides
- Snagging damage from a refit
Signs you need bath repair in Edge End
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex.
Common reasons people in Edge End contact us are:
- A failed DIY repair that is discoloured or lifting
- Chips on the rim or sides
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
Before booking anyone
- A fixed quote, and whether VAT is included
- Who turns up on the day
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
Bath repair at your home in Edge End
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. If you’re dealing with rust by the waste and overflow and a chip where the taps sit, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Edge End (GL16)
- County
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours in most cases. We leave the room clean and you’ll know when it can be used.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the following day.
Preparing for the visit
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Ask for a price
Upload photos of the damage and one of the whole item, and tell us you are in Edge End, and we will reply with a fixed quote.
Read more
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Why Edge End clients choose us
- Straight answers about what a repair can do
- One visit for most repairs
- No need to remove anything
- Fixed prices from your photos
Take a look at our prices page and guide to resurfacing and replacement costs.
Edge End questions
How long before I can use the bath?
Normally by the following day, though it depends on what we have done.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send pictures?
We review the photos and send a fixed quote and the next dates we have.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Something went through my bath. Can it be fixed?
Generally. Photos of the hole and the underside help us check.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Nearby places to Edge End
What else we do in Edge End
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Edge End and the surrounding area
Edge End is about 7 miles south of Ross-on-Wye, in Gloucestershire. Jobs in Edge End are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 470 places in Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 54 miles away.
Every address in GL16 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Chapel Walk, Malvern Way and Beech Well Lane. We also travel to Mile End (1 mile south), Lydbrook (2 miles north), Joys Green (2 miles north), Brierley (2 miles north-east) and The Pludds (2 miles north-east). We also work in nearby towns such as Quedgeley (13 miles east), Lydney (7 miles south-east), Tredworth (15 miles east), Kingsway Village (14 miles east), Cam (13 miles south-east) and Stonehouse (14 miles east).
Landmarks near Edge End
Our customers here include homes close to Berry Hill Primary School, Royal Forest of Dean College and Lakers School. Further afield, we also cover the area around Rock Castle (2.1 miles south-west) and Cinderbury Iron Age Experience (3.3 miles south). The countryside around Edge End includes Foxes Bridge Bog and Huntsham Hill.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Stick to mild cleaners and a soft cloth
- Ensure an acrylic bath is firm underfoot
- Cover the bath during DIY or decorating
- A dripping tap stains enamel, so fix it early
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
What a repair can’t fix
We will not take on work that will not last, so these are the limits:
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Edge End as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
