Cornwall · England

Bath Repair for Egloshayle homes

Bath repair for Egloshayle, without a refit. Send us photos for a fixed quote, then book a visit.

  • Repairs from £95
  • A cracked acrylic bath
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Egloshayle

Landlord and trade work in Egloshayle

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Bath repair at your home in Egloshayle

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. We are often asked to fix snagging damage from a refit and rust by the waste and overflow, on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths.

Big or small, it’s backed by a one-year guarantee in Egloshayle and across Cornwall.

Where
Egloshayle (PL27)
Region
Cornwall
Guarantee
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Leaking fittings, which need a plumber
  • A steel bath rusted through

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Egloshayle

  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

How the visit works

There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours, depending on the damage.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Let us know about parking or access
  • Let the surface dry out before the visit
  • Tell us about any previous repairs or coatings

How to get a price

Email us pictures of the damage and a wider shot of the entire item, with your PL27 postcode, and we will reply with a fixed price.

Get a free quote

Read more

Prices and what affects them

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • Doing more than one item at once
  • The size and number of damaged areas
  • The material and finish
  • What kind of damage it is

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Quotes from your photos

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • The material, if you know it
  • Whether it’s been repaired or coated before

Most customers in Egloshayle get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Our work in Egloshayle

Egloshayle is about 6 miles north-west of Bodmin, in Cornwall. Jobs in Egloshayle are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Egloshayle is one of 644 towns and villages in Cornwall where we work.

All of PL27 is within our area. Whether you live on Kay Gardens, Broomfield Road and Tower Hill or anywhere nearby, we can come to you. Close by, we cover Sladesbridge (1 mile south-east), Ball (1 mile north), Wadebridge (1 mile west), Bodieve (1 mile north-west) and Burniere (1 mile north-west). We also work in nearby towns such as Newquay (13 miles south-west), St Austell (12 miles south), Bodmin (6 miles south-east), Sandy Bottom (12 miles south), Bethel (12 miles south) and Nansledan (12 miles south-west).

Near you in Egloshayle

Around Egloshayle, we work in homes near St Petroc's Church, Wadebridge Primary Academy and Earl Of St Vincent pub and the streets around them. A little further out are Bodmin Hospital (4.8 miles south-east) and North Cornwall (0.6 miles west). Not far away are St Breock Downs.

Map of Egloshayle © OpenStreetMap contributors

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Why repair rather than replace?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Why Egloshayle customers choose us

  • Free fixed quotes from pictures
  • Colours mixed by hand to suit your surface
  • No extra charge for your area
  • No need to remove anything

Take a look at our prices page and guide to resurfacing and replacement costs.

Aftercare tips

To keep it looking its best:

  • Clean with warm water and a mild detergent
  • If an acrylic bath flexes, have its feet adjusted
  • Store metal items away from the bath
  • Avoid scourers, wire wool and gritty cream cleaners

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Questions from Egloshayle

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Tell us about it when you send photos.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

Do the materials smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Egloshayle.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Is it safe with children and pets around?

Just keep them out of the work area. We will tell you when the room can be used again.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Will the repair show?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.