Newcastle upon Tyne · England
Bath chip & crack repair in Elswick, Newcastle upon Tyne
Bath repair for Elswick, without a refit. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
Landlords, agents and businesses in Elswick
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Bath repair in Elswick without replacing anything
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Our repair technicians work on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and common reasons people get in touch are a hole punched through by something heavy and hairline or through cracks in acrylic.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Elswick (NE4, NE11, NE1)
- County
- Newcastle upon Tyne
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Elswick
More services for Elswick
The process
Arrival times are agreed in advance. On site, it takes two to three hours for most chips in most cases. The room is left tidy and you’ll know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Point us to the nearest place to park
- Let us know which floor the room is on
- Let us know if it has been repaired before
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
About Elswick
Elswick is about 2 miles south of Newcastle upon Tyne, in Newcastle upon Tyne. Across the NE4 area, we carry out the work at your property. Elswick is one of 63 places in Newcastle upon Tyne we cover.
We work across the NE4, NE11 and NE1 postcode area and the streets around it. Whether you live on Park Road, Mill Lane and Mather Road or a nearby road, a technician can come to you. Other places close to Elswick include Westgate (1 mile east), Dunston (1 mile south), Low Team (1 mile south-east), Benwell (1 mile north-west) and Spital Tongues (1 mile north). We also work in nearby towns such as Carr Hill (3 miles south-east), Denton (3 miles north-west), Low Fell (3 miles south-east), Sheriff Hill (3 miles south-east), West Denton (3 miles north-west) and Gosforth (3 miles north).
Around Elswick
Our customers here include homes close to North East Futures UTC, St Michael's RC Primary School and Newcastle University Library, among other places. Also close by are Benwell Nature Park (1.3 miles north-west), Church of St Michael And Presbytery Attached (within half a mile south-east), The Balmoral Public House (0.5 miles north-east) and Newcastle Sixth Form College (0.6 miles east). The nearest railway station is Newcastle station, about 1 mile east of the centre. Further afield, we also cover the area around The Gate (1 mile north-east) and Charge! The Story of England's Northern Cavalry (0.7 miles east). For a walk, there is Bent Hill and Addison and Hedgefield Woods.
- Local facilities include County Borough of Newcastle upon Tyne (1.3 miles east)
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- Cracks in acrylic we can’t reach from underneath
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Your questions about bath repair in Elswick
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Is there any odour?
There may be a mild smell during the work.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Clean with warm water and a mild detergent
- Don’t leave a fresh chip for long
- Don’t scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- CHAS and Constructionline accredited
- Same prices wherever you are
- One-year guarantee on every repair
- Honest advice, even when it means no job
Read our full price list and guide to resurfacing and replacement costs.
Do you need bath repair in Elswick?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
People usually call us when they notice something like this:
- A kit repair that didn’t last
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
- Chips caused by builders
Comparing quotes
- What happens if the damage is worse than the photos show
- Whether the price covers travel
- How to look after the finish
- Whether they match the colour on site
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
