Somerset · England
Bath Repair in Enmore
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Enmore, with a one-year guarantee on every repair.
- Repairs from £95
- A chipped rim or side
- Damage done while the bathroom was being fitted
Questions from Enmore
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you repair a crack in an acrylic bath?
Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Do you cover Enmore?
Yes. We work across the UK and travel to Enmore. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you cover the entire of Somerset?
All of Somerset, and the rest of the UK. There is no extra charge for travel.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
How we handle bath repair in Enmore
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and people most often call us about chips along the edge of the bath and rusty patches near the plughole.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Location
- Enmore (TA5)
- Region
- Somerset
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Enmore
We work for landlords, letting agents and housing providers in Enmore as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
For anyone letting property in or around Enmore, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Common problems we fix in Enmore
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for any of the following:
- Cracks in an acrylic bath
- Chips caused by builders
- Damage beneath the taps
- Impact holes in acrylic
Before you book anyone
- How the room is protected while they work
- What aftercare is recommended
- How soon you can use it again
- How changes to the job are handled
Honest limits
Some jobs are not right for a repair, including:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Enmore
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
What you get with us
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Everything repaired in place
- We come to you, anywhere in the UK
Read our full price list or guide to resurfacing and replacement costs.
What we do, step by step
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and how to look after it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the day after.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
Getting a price
To get a price, send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Read more
Towns and villages near Enmore
More services for Enmore
Aftercare tips
Aftercare is simple:
- Cover the bath during DIY or decorating
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse the bath after use, especially in hard water areas
- Do not leave razors or cans standing in the bath
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Where we work around Enmore
Enmore is about 4 miles west of Bridgwater, in Somerset. Whether you’re in the middle of Enmore or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 640 towns and villages across Somerset, from the larger towns to small villages.
Postcode districts we cover here: TA5. Whether you live on Frog Lane and Enmore Road or a nearby road, a technician can come to you. Neighbouring places we cover include Four Forks (1 mile north-west), Gothelney Green (2 miles north-east), Durleigh (2 miles east), Rhode (2 miles east) and Bradley Green (2 miles north). Within a short drive, we also cover Taunton (6 miles south), Bridgwater (4 miles east), Burnham-on-Sea (10 miles north-east), Wellington (11 miles south-west), Street (15 miles east) and Sydenham (5 miles east).
Landmarks near Enmore
We visit homes around Enmore Church of England Primary School, Church of St Michael and Tynte Arms, among other places. For rail, the closest station is Bridgwater station, about 4.3 miles east of the centre. Other landmarks nearby include Hestercombe House (3.9 miles south) and Cannington Camp (3.4 miles north). For a walk, there is Cothelstone Hill.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
