Staffordshire · England
Bath Repair in Enville
Bath repair in Enville without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- A hole punched through by something heavy
- Chips along the edge of the bath
Bath repair at your home in Enville
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Whether it’s scuffs and scratches in the surface and hairline or through cracks in acrylic, we can help, on whirlpool & spa baths, acrylic and cast iron enamel alike.
Every job is backed for twelve months in Enville and everywhere else. We return to put right any problem with the work.
- Where
- Enville (DY7)
- County
- Staffordshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Enville
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Common problems we fix in Enville
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- Chips caused by builders
- Rust spots around the plughole
- A chip where the taps sit
- Chips along the edge of the bath
What your quote should include
- What happens if the damage is worse than the pictures show
- Who will actually do the work
- How soon you can use it again
- A fixed quote, and whether VAT is included
Enville and the surrounding area
Enville is about 4 miles west of Kingswinford, in Staffordshire. Anywhere in DY7, a technician comes to you. Enville is one of 512 towns and villages in Staffordshire we cover. Our jobs stretch from Enville to Birmingham (15 miles away).
Here we cover the DY7 postcode area. From Blundies Lane, The Close and Brown's Lake or anywhere nearby, we can come to you. Close by, we cover Coxgreen (1 mile west), Lutley (1 mile north-west), Compton (1 mile south), Four Ashes (2 miles west) and Kinver (2 miles south-east). Further out, we also cover Wombourne (4 miles north-east), Codsall (10 miles north), Brewood (14 miles north), Bilbrook (11 miles north), Upper Landywood (15 miles north-east) and Bratch (5 miles north-east).
Local landmarks in Enville
Our clients here include homes close to Church of St Mary, The Cat Inn and Kinver High School and Sixth Form and the streets around them. Nearby you will also find Stourton Castle (2.4 miles south-east) and Wordsley Hospital (4.1 miles east). For a walk, there is Kinver Edge and Stourton Pit.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- How easy the damage is to reach
- Doing more than one item at once
- The material
- The colour and finish to match
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the photos on your phone. Just make sure we can see:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Something in shot to show the size
- A clear, close picture of the problem area
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you are under no obligation.
Also near Enville
What else we do in Enville
Enville questions
Are there extra charges for Enville?
No. Our quotes include travel, and we charge the same wherever you are.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you come to Enville?
Yes, we do. Technicians travel to Enville from across the region, with no extra charge for travel.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Is a repair better than a new one?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What happens next?
You will get a fixed quote back, typically with dates to choose from. There is no obligation to book.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Why choose Surface Doctor in Enville
- A fixed quote before booking
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- We’ll tell you if it’s not worth repairing
Read our pricing or bath cost comparison.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Ensure the room can be ventilated
- Let us know which floor the room is on
- Let the surface dry out before the visit
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
