Staffordshire · England
Bath Repair in Codsall
Bath repair for Codsall, without a refit. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Cracks in an acrylic bath
- Rust spots around the plughole
About our bath repair in Codsall
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, generally in a single visit. Whether it’s rust by the waste and overflow and chips under the taps, we can usually put it right, whatever the material.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Codsall (WV8)
- Region
- Staffordshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Codsall and the surrounding area
Codsall is about 4 miles north-west of Wolverhampton, in Staffordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Codsall is one of 512 places in Staffordshire we cover. Our nearest city page is Birmingham, about 17 miles away.
Every address in WV8 is covered. From Station Road, Church Road and Wheel Avenue or a nearby road, we can come to you. Close by, we cover Birches Bridge (1 mile south-east), Bilbrook (1 mile east), Pendeford (2 miles east), Claregate (2 miles south-east) and Aldersley (3 miles south-east). We also work in nearby towns such as Stafford (13 miles north), Cannock (9 miles north-east), Rugeley (14 miles north-east), Burntwood (12 miles east), Hednesford (10 miles north-east) and Wombourne (7 miles south).
Landmarks near Codsall
Around Codsall, we work in homes near St Nicholas Church of England First School, Codsall Community High School and St Nicholas' Church and the streets around them. There is a railway station in Codsall itself: Codsall station. Further afield, we also cover the area around Wolverhampton and Midland Counties Eye Infirmary (3.8 miles south-east) and Tettenhall Transport Heritage Centre (2.6 miles south-east).
How to look after the repair
So the finish stays in good condition for years:
- Do not scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
- Do not leave razors or cans standing in the bath
- Do not leave a fresh chip for long
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
When to call us in Codsall
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
You may need us if you’ve spotted:
- A chipped rim or side
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- Snagging damage from a refit
What your quote should include
- Aftercare advice
- What happens if the damage is worse than the photos show
- Who will actually do the work
- How the colour is matched
Places near Codsall
Other services in Codsall
The process
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Prices and what affects them
Repairs from £95. There’s no charge for travel to Codsall. The price comes down to:
- Where the damage is and how we get to it
- How hard the colour is to match
- How many areas need work
- What the surface is made of
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Natural light rather than flash
- A coin beside the damage so we can judge size
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- One price list for the whole UK
- One-year guarantee on every repair
- Normally one visit, start to finish
Take a look at our pricing or bath cost comparison.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Codsall: your questions answered
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Do you work in Codsall?
Yes, we do. Technicians travel to Codsall from across the region, and the price is the same as everywhere else.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
