Staffordshire · England
Bath Re-enamelling for Enville homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Enville. Send photos for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
Bath re-enamelling in Enville without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include stains that won’t shift and a dull, rough surface that won’t come clean, on acrylic baths, cast iron baths and pressed steel baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Location
- Enville (DY7)
- County
- Staffordshire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Enville. The price reflects:
- Access to the area
- What kind of damage it is
- Doing more than one item at once
- What the surface is made of
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Phone pictures are fine. Make sure they show:
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- Something in shot to show the size
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It usually takes a full day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Make sure the area is dry
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Do not use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Places near Enville
What else we do in Enville
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Enville
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Repairing versus replacing in Enville
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Enville
- Free fixed quotes from pictures
- We will tell you if it’s not worth repairing
- Everything repaired in place
- Most jobs done in one visit
See our prices page or bath cost comparison.
Enville and the surrounding area
Enville is about 4 miles west of Kingswinford, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Enville is one of 512 towns and villages in Staffordshire where we work. You can also see our page for Birmingham, about 15 miles away.
Here we cover the DY7 postcode area. Whether you live on Blundies Lane, The Close and Brown's Lake or anywhere nearby, we can come to you. Neighbouring places we cover include Coxgreen (1 mile west), Lutley (1 mile north-west), Compton (1 mile south), Four Ashes (2 miles west) and Kinver (2 miles south-east). We also work in nearby towns such as Wombourne (4 miles north-east), Codsall (10 miles north), Brewood (14 miles north), Bilbrook (11 miles north), Upper Landywood (15 miles north-east) and Bratch (5 miles north-east).
Around Enville
Our clients here include homes close to Church of St Mary, The Cat Inn and Kinver High School and Sixth Form and the streets around them. Well-known places in the area include Stourton Castle (2.4 miles south-east) and Wordsley Hospital (4.1 miles east). For a walk, there’s Kinver Edge and Stourton Pit.
Enville: your questions answered
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you need bath re-enamelling in Enville?
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a photo:
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- Several chips and rust patches
Questions to ask before booking
- Whether a trained technician does the job
- What happens if the damage is worse than the photos show
- How the colour is matched
- How your room will be protected
Landlord and trade work in Enville
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
