East Riding of Yorkshire · England

Bath Repair for Eppleworth homes

Our technicians come to Eppleworth for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • A chip where the taps sit
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Eppleworth

Honest limits

A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:

  • Wear across the whole surface, which needs re-enamelling
  • Leaking fittings, which need a plumber
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us photos and we’ll tell you honestly.

Materials we work on in Eppleworth

  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic

Bath repair in Eppleworth, done in place

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. We are frequently asked to fix cracks in an acrylic bath and chips caused by builders, in cast iron enamel, whirlpool & spa baths and acrylic.

All of our repairs are guaranteed for twelve months in Eppleworth and everywhere else. We return to put right any problem with the work.

Location
Eppleworth (HU16)
Region
East Riding of Yorkshire
Cover
12 months on all our work
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Eppleworth questions

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you repair something that’s been repaired before?

Generally, yes. We remove the old repair before doing a new one, so let us know about it.

Are there extra charges for Eppleworth?

No. Our quotes include travel, and we charge the same wherever you are.

What do you need from me?

Send pictures through the quote form or call 0345 017 0787.

Can a cracked acrylic bath be fixed?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across East Riding of Yorkshire.

How do I get a price for bath repair in Eppleworth?

Prices start from £95. We give a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.

Repair or replace: which is better?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why choose Surface Doctor in Eppleworth

  • A fixed quote before you book
  • Work done at your home or business
  • Nothing taken out or refitted
  • Every repair guaranteed for a year

See our pricing or bath cost comparison.

About Eppleworth

Eppleworth is about 5 miles south of Beverley, in East Riding of Yorkshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in all 299 towns and villages in East Riding of Yorkshire. Our jobs stretch from Eppleworth to Leeds (45 miles away).

Our technicians cover all of the HU16 postcode area. Close by, we cover Skidby (1 mile north), Cottingham (2 miles east), Kirk Ella (2 miles south), Willerby (2 miles south-east) and West Ella (2 miles south). Within a short drive, we also cover Beverley (5 miles north), Hessle (4 miles south), Hornsea (15 miles north-east), Market Weighton (10 miles north-west), Brough (5 miles south-west) and Hedon (11 miles east).

Around Eppleworth

Locally, our jobs take us to homes close to Skidby Church of England Voluntary Controlled Primary School, Church At De La Pole Hospital (Block 49) and Half Moon pub and the streets around them. Eppleworth’s nearest station is Cottingham station, about 2.2 miles east of the centre. Well-known places in the area include Castle Hill Hospital (0.5 miles east) and Baynard Castle (1.6 miles east).

  • Local facilities include Humberside (2.4 miles north-west)
Map of Eppleworth © OpenStreetMap contributors

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Work for landlords and builders

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Eppleworth, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Store metal items away from the bath
  • Put a towel in the bath if you are working above it
  • Avoid scourers, wire wool and gritty cream cleaners
  • Fix dripping taps early to stop staining and limescale

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Common problems we fix in Eppleworth

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.

Keep an eye out for any of the following:

  • Chips under the taps
  • A kit repair that didn’t last
  • Impact holes in acrylic
  • Rusty patches near the plughole

What to look for in a quote

  • Whether a trained technician does the job
  • How soon you can use it again
  • How to look after the finish
  • What happens if they find more damage

10 questions to ask before you book

What bath repair costs

Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:

  • What the surface is made of
  • The type of damage
  • The colour and finish to match
  • Access to the area

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed quote

When you take your pictures, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • One sharp close-up of the damage
  • Any details about the material
  • Any earlier repairs or coatings

For a price in Eppleworth, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

What we do, step by step

There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take two to three hours for most chips, including clearing up.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Tell us about any previous repairs or coatings
  • Tell us if there are stairs or a lift
  • Ensure the room can be ventilated

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.