Windsor and Maidenhead · England
Bath Repair in Eton
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Eton and across Windsor and Maidenhead. Free, fixed quotes from your pictures.
- Repairs from £95
- Rusty patches near the plughole
- Impact holes in acrylic
How we handle bath repair in Eton
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our repair technicians work on roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and the jobs we see most are damage beneath the taps and scuffs and scratches in the surface.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Area
- Eton (SL4)
- Region
- Windsor and Maidenhead
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Eton
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
About Eton
Eton is about 1 mile north-east of Windsor, in Windsor and Maidenhead. Whether you are in the middle of Eton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 57 towns and villages in Windsor and Maidenhead, from the larger towns to small villages. Our nearest city page is London, about 22 miles away.
Here we cover the SL4 postcode area. Local streets include High Street, Eton Square and Common Lane, all of which we cover. Eton is on the A332 and B3022, which makes it straightforward to reach. We also cover the places around Eton: Clewer (1 mile south-west), Eton Wick (1 mile west), Windsor (1 mile south-west), Boveney (2 miles west) and Dedworth (2 miles south-west). Further out, we also cover Maidenhead (6 miles west), Boyn Hill (6 miles west), North Ascot (6 miles south-west), Cookham (7 miles north-west), Furze Platt (6 miles north-west) and Broomhall (7 miles south).
What’s near Eton
Around Eton, we work in homes near The Goswells, Church of Saint John the Evangelist and Christopher Hotel. You will also find Eton Porny CofE First School (within half a mile south), The Windsor Boys' School (0.9 miles south-west) and St George's School (0.6 miles south). The closest station to Eton is Windsor & Eton Riverside station, roughly 0.5 miles south of the centre. A little further out are Upton Hospital (1.1 miles north-east) and Museum of Eton Life (within half a mile south). Open spaces near Eton include Taplow Lake and Bray Pit.
- Parks and local facilities nearby include Municipal Borough of Slough (1.4 miles north-east)
Repair or replace in Eton?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there is no premium for Eton. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- Most jobs done in one visit
Take a look at our pricing and bath cost comparison.
What affects the price in Eton
Repairs from £95. There’s no charge for travel to Eton. The price depends on:
- The material
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Access to the area
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- Something in shot to show the size
- Your postcode, so we can check dates
- One sharp close-up of the damage
- A picture taken from further back
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Looking after it afterwards
Nothing complicated is needed:
- Have new chips seen to early
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath does not move when you stand in it
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
More services for Eton
Do you need bath repair in Eton?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
Signs it’s time to call us include:
- Chips caused by builders
- A hole punched through by something heavy
- A chip where the taps sit
- A kit repair that didn’t last
Questions to ask before you book
- What the guarantee covers, and for how long
- Whether the price covers travel
- How long it needs to cure
- Whether cleaning and preparation are in the price
Eton: your questions answered
Do you come to Eton?
Yes, we do. We send a technician to Eton for every job, with no extra charge for travel.
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What happens if you find more damage?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
What areas do you cover?
All of Windsor and Maidenhead, and the rest of the UK. Travel is included in the price.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
The process
Arrival times are agreed in advance. On site, it takes two to three hours for most chips in most cases. We leave the room clean.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Let us know if it has been repaired before
Ask for a price
If you’re in Eton and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Honest limits
A repair is not right for every job, including:
- Cracks in acrylic we cannot reach from underneath
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
