Ceredigion · Wales
Bath chip & crack repair in Felindre, Ceredigion
We travel to Felindre for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Scratches you can feel with a fingernail

How we handle bath repair in Felindre
Most of our bath repairs take a few hours, and you can usually bathe again the day after. There is no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with chips caused by builders and a cracked acrylic bath, we can help, on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths alike.
All our work is covered by our one-year guarantee.
- Location
- Felindre (SA44)
- Area hub
- Ceredigion
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026

When to call us in Felindre
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move.
Look out for any of the following:
- An old repair that has yellowed or come loose
- Chips on the rim or sides
- Chips caused by builders
- A cracked acrylic bath
Questions to ask before booking
- When it can be used again
- What aftercare is recommended
- Whether the colour is mixed to match
- What happens if the damage is worse than the pictures show
Towns and villages near Felindre
More services for Felindre
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Felindre questions
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Something went through my bath. Can it be fixed?
Normally. Send us a picture of the hole and one from under the bath if you can.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Do you work in Felindre?
Yes, we do. Repair technicians travel to Felindre from across the region, with no extra charge for travel.
When a repair is not the answer
In fairness, some problems need a different fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Felindre
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a morning or an afternoon, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Check that an acrylic bath does not move when you stand in it
- Cover the bath during DIY or decorating
- Don’t leave razors or cans standing in the bath
- Clean with warm water and a mild detergent
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Repair or replace in Felindre?
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Felindre clients choose us
- CHAS, Constructionline and SafeContractor accredited
- Generally one visit, start to finish
- Colour mixed on the day to match
- A fixed quote before you book
Read our prices page or guide to resurfacing and replacement costs.
Felindre and the surrounding area
Felindre is about 12 miles north of Carmarthen, in Ceredigion. From the centre of Felindre to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 125 places across Ceredigion.
Our visits in SA44 work the same way as everywhere else we cover. Neighbouring places we cover include Pentrecagal (1 mile north-west), Aber-arad (3 miles west), Newcastle Emlyn (3 miles north-west), Bryndioddef-isaf (3 miles north-west) and Cwm-cou (4 miles north-west). Within a short drive, we also cover Aberteifi (12 miles west), Lampeter (15 miles north-east), Bridgend (12 miles west), New Quay (13 miles north), Llandudoch (13 miles west) and Llandysul (4 miles east).
Local landmarks in Felindre
Typical jobs here are in homes near Tafarn John y Gwas pub and St Barnabas's Church and the streets around them. A little further out are Castell Waun-Withan (1.8 miles south-east) and Maesllyn Woolen Mill & Museum (within half a mile north-east). Open spaces near Felindre include Moelfre.
- Parks and local facilities nearby include Orllwyn Teifi (3 miles north)
What affects the price in Felindre
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- How hard the colour is to match
- How many areas need work
- Where the damage is and how we get to it
- What kind of damage it is
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.

