Carmarthenshire · Wales

Bath chip & crack repair in Aber-arad, Carmarthenshire

Our technicians come to Aber-arad for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Rust by the waste and overflow
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Aber-arad

Honest limits

In fairness, there are a few things a repair will not fix:

  • A bath that moves underfoot, until its support is fixed
  • Water coming from the waste or taps rather than the bath
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Aber-arad

  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel

Bath repair at your home in Aber-arad

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. Common call-outs are for chips on the rim or sides and a failed DIY repair that’s discoloured or lifting, across pressed steel enamel, acrylic and cast iron enamel.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Location
Aber-arad (SA38)
Area hub
Carmarthenshire
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Repairing versus replacing in Aber-arad

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Aber-arad. The job itself decides the price: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Aber-arad

  • Accredited with CHAS, Constructionline and SafeContractor
  • We leave the room as we found it
  • Colours mixed by hand to suit your surface
  • Technicians who travel to you, UK-wide

See our pricing and resurfacing vs replacement cost guide.

About Aber-arad

Aber-arad is about 14 miles north-west of Carmarthen, in Carmarthenshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Aber-arad is one of 195 towns and villages in Carmarthenshire we cover.

All of SA38 is covered. Whether you live on Market Place, Station Road and Heol Dewi or a nearby road, a technician can come to you. You’ll find Aber-arad on the A475 and A484, so it’s easy for us to reach. Nearby, we also work in Newcastle Emlyn (1 mile north-west), Bryndioddef-isaf (1 mile north), Pentrecagal (2 miles east), Cwm-cou (2 miles north-west) and Felindre (3 miles east). Larger places within reach include Carmarthen (14 miles south-east), Cwmoernant (13 miles south-east), Pen-sarn (14 miles south-east), Tanerdy (14 miles south-east), Tregynnwr (15 miles south-east) and Sanclêr (15 miles south).

Near you in Aber-arad

Typical jobs here are in homes near Coopers Arms and the streets around them. Other landmarks nearby include National Wool Museum (2.7 miles east) and Newcastle Emlyn Castle (under half a mile north-west). Green spaces nearby include Allt yr Esgob.

Map of Aber-arad © OpenStreetMap contributors

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Tell us about any previous repairs or coatings
  • Open a window if you can

Get a quote

If you’re in Aber-arad and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Read more

Landlords, agents and businesses in Aber-arad

We carry out planned and one-off repairs for housing associations and facilities teams in Carmarthenshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

FAQs for Aber-arad

Do you work in Aber-arad?

Yes, we do. We send a technician to Aber-arad for every job, and the price is the same as everywhere else.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Is a holed acrylic bath repairable?

Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

Is there a guarantee?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

What does bath repair cost?

Repairs from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your SA38 postcode.

Do you need bath repair in Aber-arad?

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.

Clients normally contact us about:

  • Damage beneath the taps
  • Rusty patches near the plughole
  • Scuffs and scratches in the surface
  • Chips caused by builders

Before you book anyone

  • Whether the price covers travel
  • What aftercare is recommended
  • The length of the guarantee and what it covers
  • Whether the colour is mixed to match

How to compare quotes

What affects the price in Aber-arad

Prices start from £95. We charge the same across the UK, including Aber-arad. The price reflects:

  • How many items we do on one visit
  • The colour and finish to match
  • How easy the damage is to reach
  • The type of damage

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

How to get a fixed price

Photographing the damage takes a minute. Try to send:

  • Any earlier repairs or coatings
  • Any details about the material
  • One sharp close-up of the damage
  • Something in shot to show the size

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.

How to look after the repair

Much of the damage we repair could have been avoided. These habits help:

  • Don’t leave razors or cans standing in the bath
  • Check that an acrylic bath does not move when you stand in it
  • Put a towel in the bath if you are working above it
  • A dripping tap stains enamel, so fix it early

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.