Ceredigion · Wales
Bath chip & crack repair in New Quay, Ceredigion
Damaged bath in New Quay? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips caused by builders
- Chips on the rim or sides

About our bath repair in New Quay
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with chips under the taps and rust by the waste and overflow, we can typically put it right, whatever the material.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- New Quay (SA45)
- Region
- Ceredigion
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

Prices and what affects them
Repairs from £95. We charge the same across the UK, including New Quay. What changes the price is:
- Access to the area
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- The material
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A photo taken from further back
For a price in New Quay, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Towns and villages near New Quay
More services for New Quay
Landlord and trade work in New Quay
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Signs you need bath repair in New Quay
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Most people get in touch when they notice something like this:
- A cracked acrylic bath
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
What to look for in a quote
- What the guarantee covers, and for how long
- How soon you can use it again
- How to look after the finish
- What happens if the damage is worse than the pictures show
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
What we can’t put right
We will always be straight with you, so here’s what a repair cannot fix:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in New Quay
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Ensure an acrylic bath is firm underfoot
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
- Fix dripping taps early to stop staining and limescale
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Our work in New Quay
New Quay (Welsh: Ceinewydd) is about 25 miles north of Carmarthen, in Ceredigion. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. New Quay is one of 125 places in Ceredigion we cover.
We work across the SA45 postcode area. We regularly work on streets such as High Street, Church Road and Picton Terrace and the roads around them. New Quay sits on or near the A486 and B4342, which makes travel easy. We also travel to Maen-y-groes (1 mile south), Llanina (1 mile south-east), Gilfachreda (1 mile east), Llanllwchaiarn (2 miles south-east) and Cross Inn (2 miles south). Within a short drive, we also cover Aberteifi (15 miles south-west), Aberaeron (5 miles north-east), Lampeter (14 miles south-east) and Llandysul (12 miles south). Being one of Ceredigion’s larger places, New Quay is somewhere we visit often.
What’s near New Quay
Typical jobs here are in homes near The Queens Hotel and Church of St. Llwchaiarn. Other landmarks nearby include Castell Caer Wedros (2.7 miles south) and New Quay Heritage Centre (under half a mile north-west). Not far away are Allt Cefn Gwyddyl.
- Parks and local facilities nearby include Cydplwyf (1.2 miles south-east)
New Quay questions
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will the repair show?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
About our accreditations · Every repair comes with a one-year guarantee.

