Oxfordshire · England
Bath Repair in Finstock
Damaged bath in Finstock? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
What a repair cannot fix
It helps to know what we can’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Bath repair in Finstock, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We are frequently asked to fix scuffs and scratches in the surface and chips along the edge of the bath, in cast iron enamel, pressed steel enamel and roll-top & freestanding.
All of our repairs are guaranteed for twelve months in Finstock and everywhere else. We return to put right any problem with the work.
- Location
- Finstock (OX7)
- Area hub
- Oxfordshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Other services in Finstock
Questions from Finstock
When can I have a bath again?
Generally the following day. We will tell you the exact curing time when we finish.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
How do I get a price for bath repair in Finstock?
Prices start from £95. Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the entire item with your OX7 postcode.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you cover Finstock?
Yes, we do. We send a technician to Finstock for every job, with no extra charge for travel.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a few hours, depending on the damage. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Read more
Finstock and nearby
Finstock is about 4 miles north of Witney, in Oxfordshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Finstock is one of 443 towns and villages in Oxfordshire where we work. Our jobs stretch from Finstock to Birmingham (47 miles away).
We work across the OX7 postcode area and the streets around it. Whether you live on High Street, Hill Crescent and Well Hill or anywhere nearby, a technician can come to you. If you’re just outside Finstock, we cover Ramsden (1 mile south-west), Fawler (1 mile north-east), Delly End (2 miles south), Charlbury (2 miles north) and Stonesfield (2 miles east). Further out, we also cover Oxford (12 miles south-east), Bicester (14 miles east), Abingdon-on-Thames (14 miles south-east), Witney (4 miles south), Carterton (7 miles south-west) and Faringdon (14 miles south).
Local landmarks in Finstock
In Finstock, that means homes near Finstock Church of England Primary School, Church of the Holy Trinity and The Plough Inn and the streets around them. Finstock’s nearest station is Finstock station, about 0.7 miles north-east. Not far away are Blenheim Farm.
When to call us in Finstock
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
You may need us if you’ve spotted any of these:
- Damage beneath the taps
- Chips caused by builders
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
What to look for in a quote
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
- How changes to the job are handled
What affects the price in Finstock
Prices start from £95. You will not pay by the hour. The price is based on:
- The type of damage
- Doing more than one item at once
- Previous DIY repairs that have to come out
- How easy the damage is to reach
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Photographing the damage takes a minute. Please include:
- Whether it’s been repaired or coated before
- One picture of the whole bath
- A close-up of the damage, in focus
- Natural light rather than flash
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
- We will tell you if it’s not worth repairing
- Most jobs done in one visit
See our pricing and bath cost comparison.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- Do not scrub with anything abrasive
- Put a towel in the bath if you’re working above it
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
About our accreditations · Every repair comes with a one-year guarantee.
